Paper
6 November 1986 Optimization Of Optoelectronic Characteristics Of Sintered Cadmium Sulphide Photoconductive Layers
Mary Juliana Chockalingam, C. V. Suryanarayana
Author Affiliations +
Abstract
Photograde cadmium sulphide useful for sintered polycrystalline cadmium sulphide photoconductive cells as also for solar cells can be prepared by a simple chemical reaction between a soluble cadmium salt and thiourea in an aqueous alkaline solution by optimising the pH, temperature and concentration of the constituents in the bath. The precipitated cadmium-sulphide after drying at 120°C was found to result in a photograde quality of 99.999% pure cadmium sulphide as estimated by atomic absorption spectrophotometer. Details are given in this paper, of the process of preparation of CdS powder, screen printing and sintering the cadmium sulphide layers to give finally the photoconductive cell which gave on irradiation a change in the resistance of six to seven orders. The sintering technique and the mechanism of the reaction resulting in high photosensitivity of the layer obtained are discussed in detail.
© (1986) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mary Juliana Chockalingam and C. V. Suryanarayana "Optimization Of Optoelectronic Characteristics Of Sintered Cadmium Sulphide Photoconductive Layers", Proc. SPIE 0686, Infrared Detectors, Sensors, and Focal Plane Arrays, (6 November 1986); https://doi.org/10.1117/12.936524
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cadmium

Cadmium sulfide

Resistance

Copper

Glasses

Hydrogen

Ions

Back to Top