Adaptive and compliant wingtip devices enabled by additive manufacturing and multistable structures

Kimberly Gustafson; Luis Urrutia; Alexander Pankonien; Gregory Reich; Aimy Wissa

doi:10.1117/12.2514197

13 March 2019 Adaptive and compliant wingtip devices enabled by additive manufacturing and multistable structures

Kimberly Gustafson, Luis Urrutia, Alexander Pankonien, Gregory Reich, Aimy Wissa

Proceedings Volume 10965, Bioinspiration, Biomimetics, and Bioreplication IX; 109650J (2019) https://doi.org/10.1117/12.2514197
Event: SPIE Smart Structures + Nondestructive Evaluation, 2019, Denver, Colorado, United States

Abstract

Multifunctional lifting surfaces can expand the mission capabilities of aerial vehicles with a minimal number of components added to the vehicle. This paper presents a bio-inspired segmented wingtip concept for lift enhancement enabled by passive structural tailoring and active bistable truss mechanisms. The development of wingtips stems from studies of birds with desirable flight capabilities. The structural characteristics and maneuverable changes of a bird’s primary feathers during flight have identified three notable feather degrees of freedom: incidence angle, dihedral angle, and gap spacing. Wind tunnel experiments conducted on multi-wingtip systems have determined that different wingtip orientations and spacings are desired to enhance aerodynamic performance depending on the flight conditions. These results suggest that the wingtip degrees of freedom must be varied during flight to achieve optimal aerodynamic performance. This paper presents two structural concepts, one passive and one active, to achieve desired morphological wingtip parameters during flight. The passive structural concept exploits bend-twist coupling of additively manufactured composite laminate wingtips by using aerodynamic loads to induce passive shape adaptation of the composite wingtips to control the twist and dihedral angles. The active concept utilizes bistable truss mechanisms to vary the wingtip gap spacing. The force-displacement responses of bistable mechanisms and the bending and twist of bend-twist coupled composite wingtips are measured using a universal testing machine and Digital Image Correlation, respectively. Experimental results include the energy storage characterization of the bistable mechanisms as a function of material characteristics and the bend-twist coupling of the composite wingtips as a function of fabrication process and laminate properties.

Conference Presentation

Citation Download Citation

Kimberly Gustafson, Luis Urrutia, Alexander Pankonien, Gregory Reich, and Aimy Wissa "Adaptive and compliant wingtip devices enabled by additive manufacturing and multistable structures", Proc. SPIE 10965, Bioinspiration, Biomimetics, and Bioreplication IX, 109650J (13 March 2019); https://doi.org/10.1117/12.2514197

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available