Paper
1 April 2020 Experimental validations of simulated scan patterns of rotational Risley prisms
Author Affiliations +
Abstract
Laser scanners with Risley prisms have the potential to perform a faster scanning in comparison to other twodimensional (2D) laser scanners, for example galvanometer-based. However, in contrast to the (constant speed) raster scanning produced by the latter, scan patterns of Risley prisms are highly non-linear, have intersection points, and are performed with variable speeds. The aim of this study is to build upon the novel, graphical method we have, to our knowledge, introduced for the study of these scan patterns. In contrast to complex analytical methods and to approximate ones, this graphical method is easy-to-apply and it provides exact scan patterns, respectively. In this study examples of experimental results are obtained to validate simulation results obtained using simple prisms equations and a commercially-available mechanical design program, CATIA V5 (Dassault Systèmes, Paris, France). Several characteristics of the laser scanner with a pair of rotational wedges are considered, with a focus on one of Marshall’s parameters, i.e. the ratio M of the rotational speeds of the prisms. An experimental validation is demonstrated for all characteristic graphs of the scan patterns for two pairs of values, M equals 2 or -2, as well as 8 and -8. The contrast between positive and negative values of M, as well as between lower and higher absolute values can be thus observed. As this is but a step in this study, directions of current work are also pointed out.
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Alexandru-Lucian Dîmb and Virgil-Florin Duma "Experimental validations of simulated scan patterns of rotational Risley prisms", Proc. SPIE 11354, Optical Sensing and Detection VI, 113541U (1 April 2020); https://doi.org/10.1117/12.2542009
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Prisms

Laser scanners

Mechanical engineering

3D modeling

3D scanning

Scanners

Interferometry

RELATED CONTENT

Optical coherence tomography-based 3D intraoral scanner
Proceedings of SPIE (July 19 2019)
A flexible 3D laser scanning system using a robotic arm
Proceedings of SPIE (June 26 2017)
Raster Revisited Or Raster To Vector And Vector To Raster...
Proceedings of SPIE (September 10 1980)
Scanning Hartmann instrument
Proceedings of SPIE (March 26 1992)
Integrated micromachined scanning display systems
Proceedings of SPIE (July 19 1999)

Back to Top