A 2-D Convolver Architecture For Real-Time Image Processing

David Landeta; Chris W. Malinowski

doi:10.1117/12.970119

1 November 1989 A 2-D Convolver Architecture For Real-Time Image Processing

David Landeta, Chris W. Malinowski

Proceedings Volume 1199, Visual Communications and Image Processing IV; (1989) https://doi.org/10.1117/12.970119
Event: 1989 Symposium on Visual Communications, Image Processing, and Intelligent Robotics Systems, 1989, Philadelphia, PA, United States

Abstract

This paper presents a novel architecture for two VLSI ICs, an 8-bit and 12-bit version, which execute real-time 3x3 kernel image convolutions at rates exceeding 10 ms per 512x512 pixel frame (at a 30 MHz external clock rate). The ICs are capable of performing "on-the-fly" convolutions of images without any need for external input image buffers. Both symmetric and asymmetric coefficient kernels are supported, with coefficient precision up to 12 bits. Nine on-chip multiplier-accumulators maintain double-precision accuracy for maximum precision of the results and minimum roundoff noise. In addition, an on-chip ALU can be switched into the pixel datapath to perform simultaneous pixel-point operations on the incoming data. Thus, operations such as thresholding, inversion, shifts, and double frame arithmetic can be performed on the pixels with no extra speed penalty. Flexible internal datapaths of the processors provide easy means for cascadability of several devices if larger image arrays need to be processed. Moreover, larger convolution kernels, such as 6x6, can easily be supported with no speed penalty by employing two or more convolvers. On-chip delay buffers can be programmed to any desired raster line width up to 1024 pixels. The delay buffers may also be bypassed when direct "Sum-Of-Products" operation of the multipliers is required; such as when external frame buffer address sequencing is desired. These features make the convolvers suitable for applications such as affine and bilinear interpolation, one-dimensional convolution (FIR filtration), and matrix operations. Several examples of applications illustrating stand-alone and cascade mode operation of the ICs will be discussed

Citation Download Citation

David Landeta and Chris W. Malinowski "A 2-D Convolver Architecture For Real-Time Image Processing", Proc. SPIE 1199, Visual Communications and Image Processing IV, (1 November 1989); https://doi.org/10.1117/12.970119

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available