Presentation + Paper
19 May 2022 Optimising draw parameters for the fabrication of low loss silicon-core optical fibre
Author Affiliations +
Abstract
Optical fibre consisting of a pure silicon core in silica cladding combines the advantageous properties of silicon waveguides with the convenience of optical fibre. However, the optical quality of these fibres is highly dependent on the crystalline structure and the purity of the silicon. The fabrication of these fibres requires engineering of the thermal gradients during the drawing process to ensure optimal crystallisation of the silicon. Here, we investigated the effects of draw speed and analyse the induced stresses at multiple stages in the fabrication process. The thermal exposure of the silicon while in contact with a silica cladding was found to increase the optical losses. This was attributed to the diffusion of impurities from the silica cladding into the silicon core.
Conference Presentation
© (2022) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Clarissa M. Harvey, Korbinian Mühlberger, Taras Oriekhov, and Michael Fokine "Optimising draw parameters for the fabrication of low loss silicon-core optical fibre", Proc. SPIE 12140, Micro-Structured and Specialty Optical Fibres VII, 121400A (19 May 2022); https://doi.org/10.1117/12.2621495
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silicon

Silica

Crystals

Optical fibers

Gas lasers

Interfaces

Raman spectroscopy

Back to Top