Sensor-guided machining of large-scale CFRP components based on resin transfer molded features

M. Muth; P. Carstensen; W. Hintze; S. Gnadt; C. Brillinger; C. Möller; C. Böhlmann

doi:10.1117/12.2673830

15 August 2023 Sensor-guided machining of large-scale CFRP components based on resin transfer molded features

M. Muth, P. Carstensen, W. Hintze, S. Gnadt, C. Brillinger, C. Möller, C. Böhlmann

Proceedings Volume 12618, Optical Measurement Systems for Industrial Inspection XIII; 1261809 (2023) https://doi.org/10.1117/12.2673830
Event: SPIE Optical Metrology, 2023, Munich, Germany

Abstract

Carbon fiber-reinforced Plastics (CFRP) are a key factor for achieving a carbon-neutral mobility sector due to their lightweight properties. Despite their near-net-shape manufacturing subsequent precision machining is required. In case of large-scale CFRP components, which are characterized by small quantities and low machining volumes, such processes are difficult to operate economically with conventional systems. Robotic systems offer a suitable solution. Their use in machining, however, requires additional measures to compensate for structural system limitations. In addition, individual deviations of the blanks require time-consuming measuring for referencing the machining system. To enable the use of cost-efficient robotic systems and to eliminate unproductive downtime for measuring, the intended manufacturing of CFRP components by Resin Transfer Molding (RTM) offers a new opportunity. RTM allows for the integration of defined features into the molding tool, which are reproduced inverted on the component and can be referenced by subsequent processes. This is utilized with adapted strategies for time-efficient measuring and high-precision machining. Fundamentals for the corresponding feature design as well as the selection of a suitable measuring device are presented. Focusing on laser-based sensors, the relationship between wavelength and (semi-)transparent surfaces is discussed and validated. Besides the metrological detection, production-specific aspects are also taken into account. Based on the gained knowledge, the main aspects of a proper sensor-feature combination are elaborated and prototypically realized. Finally, an outlook is provided on the challenges involved when implementing a robust algorithm for feature detection.

Conference Presentation

Citation Download Citation

M. Muth, P. Carstensen, W. Hintze, S. Gnadt, C. Brillinger, C. Möller, and C. Böhlmann "Sensor-guided machining of large-scale CFRP components based on resin transfer molded features", Proc. SPIE 12618, Optical Measurement Systems for Industrial Inspection XIII, 1261809 (15 August 2023); https://doi.org/10.1117/12.2673830

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available