Inverse optical design using quasi-two-dimensional partially coherent imaging for photolithography overlay metrology

Akinori Ohkubo; Sungho Jang; Jungchul Lee; Sangwoo Bae

doi:10.1117/12.2676094

28 September 2023 Inverse optical design using quasi-two-dimensional partially coherent imaging for photolithography overlay metrology

Akinori Ohkubo, Sungho Jang, Jungchul Lee, Sangwoo Bae

Author Affiliations +

Proceedings Volume 12664, Optical Modeling and Performance Predictions XIII; 126640J (2023) https://doi.org/10.1117/12.2676094
Event: SPIE Optical Engineering + Applications, 2023, San Diego, California, United States

Conference Poster

Abstract

Overlay measurement error is a critical technical issue in the production of highly stacked semiconductor devices, including VNAND memory chips, CMOS image sensors, and three-dimensional packages. Complicated device structure and stacked structure increase the measurement error of overlay alignment mark position. Inverse optical design or system optimization is required to improve overlay metrology accuracy and measurement robustness. Illumination light source wavelength, source bandwidth, illumination mode, and imaging pupil filter can be optimized for overlay metrology signal with various kinds of complicated device structure. We proposed a practical inverse optical solution to improve the accuracy of overlay metrology. The inverse optical design consists of overlay mark reflectance estimation and optical configuration optimization. Both the estimation and optimization are accelerated using a quasi-two-dimensional partially coherent imaging model. We achieve more than 50 times faster imaging simulation acceleration compared to a conventional simulation algorithm for partially coherent illumination imaging with practical accuracy. Further improvement can be realized with an introduce of an overlay mark reflectance matrix computed by a rigorous electromagnetic analysis simulation for each specific device structure. This robust and practical inverse solution can help improve the overlay accuracy and manufacturing yield of highly complex three-dimensional devices.

(2023) Published by SPIE. Downloading of the abstract is permitted for personal use only.

Citation Download Citation

Akinori Ohkubo, Sungho Jang, Jungchul Lee, and Sangwoo Bae "Inverse optical design using quasi-two-dimensional partially coherent imaging for photolithography overlay metrology", Proc. SPIE 12664, Optical Modeling and Performance Predictions XIII, 126640J (28 September 2023); https://doi.org/10.1117/12.2676094

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available