Paper
20 February 1998 Iron oxide films in tribological surfaces of alloy steel
S. B. Sakrani, J. L. Sullivan
Author Affiliations +
Proceedings Volume 3175, Third International Conference on Thin Film Physics and Applications; (1998) https://doi.org/10.1117/12.300662
Event: Third International Conference on Thin Film Physics and Applications, 1997, Shanghai, China
Abstract
The formation of iron oxide films and their roles in determining the dry wear properties of low alloy steel couples are described. Essentially, alpha-Fe2O3, haematites (Fe3O4), wustite (FeO) and oxide mixtures were the predominant compositions found in four regions of mild oxidational wear. The oxides were initially formed during subsequent rubbing and removal of material from the surfaces where oxidation, nucleation and agglomeration processes took place, followed by plastic deformation and work-hardening of underlying layers which supported the films. These films were found to be protective against wear; stable film of Fe3O4 reduced wear rate down to as low as 10-13 m3m-1, while loose particles of FeO maintained wear rate greater than 10-12 m3m-1. The wear protective nature of (alpha) -Fe2O3 and mixed films were found to lie between these extreme limits. Hence, the role of oxide films, in particular Fe3O4, is very significant in minimizing the wear and friction of alloy steel.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
S. B. Sakrani and J. L. Sullivan "Iron oxide films in tribological surfaces of alloy steel", Proc. SPIE 3175, Third International Conference on Thin Film Physics and Applications, (20 February 1998); https://doi.org/10.1117/12.300662
Lens.org Logo
CITATIONS
Cited by 8 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Iron

Oxides

Oxidation

Particles

Back to Top