Paper
30 April 2003 Mechanical properties of fluoride glass fibers
Author Affiliations +
Abstract
Fluoride glass fibers are used for various passive and active applications. Current fibers are made from fluorozirconate glasses. Their intrinsic strength is smaller than that of silica fibers and their surface may be damaged by liquid water. The discrepancy between the reported values of the fiber strength reflects the major part of the extrinsic defects in the failure mechanism. The surface of the glass preform determines fiber strength to a large extent and numerous defects are induced during fiber processing. These defects are largely correlated to the chemical action of water. Dynamic fatigue measurements have been carried out. They show that the average strength depends on fiber length even though when a proof test is made prior to measurement. Fiber strength is not constant for all fiber segments originating from the same preform. Atmospheric humidity also influences fiber strength and dried fiber show much larger failure stress. Aqueous solutions corrode surface fiber resulting in the significant decrease of the fiber strength. Structural relaxation may occur in fibers under stress inducing permanent bending and reduction of applied stress. Fibers hermetically packaged are more reliable and some of them have been used in outdoors conditions for years. While surface has to be protected from water in any case, controlling extrinsic defects should lead to the large improvement of the fluoride fiber strength.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Marcel Poulain, Nicolas Gougeon, and Gwenael Mazé "Mechanical properties of fluoride glass fibers", Proc. SPIE 4940, Reliability of Optical Fiber Components, Devices, Systems, and Networks, (30 April 2003); https://doi.org/10.1117/12.477393
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical fibers

Glasses

Coating

ZBLAN

Silica

Manufacturing

Crystals

RELATED CONTENT

Influence of dehydration on strength of silica fibers
Proceedings of SPIE (February 17 2003)
Static fatigue of silica fibers
Proceedings of SPIE (June 25 2002)
Infrared Transmitting Glass
Proceedings of SPIE (September 25 1979)
Viscoelastic Deformation Of Fluoride Glass Fibers
Proceedings of SPIE (December 19 1986)

Back to Top