Application of infrared imaging for quality inspection in resistance spot welds

Wanchuck Woo; Charles W. Chin; Zhili Feng; Hsin Wang; Wei Zhang; Hanbing Xu; Philip S. Sklad

doi:10.1117/12.818368

22 April 2009 Application of infrared imaging for quality inspection in resistance spot welds

Wanchuck Woo, Charles W. Chin, Zhili Feng, Hsin Wang, Wei Zhang, Hanbing Xu, Philip S. Sklad

Proceedings Volume 7299, Thermosense XXXI; 729912 (2009) https://doi.org/10.1117/12.818368
Event: SPIE Defense, Security, and Sensing, 2009, Orlando, Florida, United States

Abstract

Infrared thermal imaging method was applied for the development of a non-destructive inspection technique to determine the quality of resistance spot welds. The current work is an initial feasibility study based on post-mortem inspection. First, resistance spot welds were fabricated on dual phase steel sheets (DP 590 steel) with carefullycontrolled welding parameters. It created welds with desirable and undesirable qualities in terms of nugget size, indentation depth, and voids and cracks. Second, five different heating and cooling methods were evaluated. The heating or cooling source was applied on one side of the weld stack while the surface temperature change on the other side of the weld was recorded using an infrared camera. Correlation between the weld quality and the "thermal signature" of each weld was established. Finally, a simplified thermal finite element analysis was developed to simulate the heat flow during inspection. The thermal model provided insight into the effect of the nugget size and indentation depth on the peak temperature and heating rate. The results reported in this work indicate that the IR thermography technique is feasible for weld quality inspection due to the distinguish temperature profiles for different welds and the repeatability and consistency in measurement.

Citation Download Citation

Wanchuck Woo, Charles W. Chin, Zhili Feng, Hsin Wang, Wei Zhang, Hanbing Xu, and Philip S. Sklad "Application of infrared imaging for quality inspection in resistance spot welds", Proc. SPIE 7299, Thermosense XXXI, 729912 (22 April 2009); https://doi.org/10.1117/12.818368

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available