Calibration method for large internal micrometer with three-point contact

Rui tao Sui

doi:10.1117/12.885288

28 December 2010 Calibration method for large internal micrometer with three-point contact

Rui tao Sui

Proceedings Volume 7544, Sixth International Symposium on Precision Engineering Measurements and Instrumentation; 754413 (2010) https://doi.org/10.1117/12.885288
Event: Sixth International Symposium on Precision Engineering Measurements and Instrumentation, 2010, Hangzhou, China

Abstract

With the development of the machinery industry and the enhancement of the components precision, the large internal micrometer with three-point contact broadens its field of application. However, the calibration method for large internal micrometer with three-point contact has not been solved completely. In order to solve all the calibration problems for large internal micrometer with three-point contact of 100mm and above, this paper proposes a new calibration method. Different from that of the calibration criterion JJF1091-2002 in Micrometer for Measuring inside Dimension, this method mainly uses the high precision CMM to calibrate the internal micrometer with three-point contact. The procedures are as follows. First, use the CMM to scan and measure the internal micrometer with three-point contact. Next, make the evaluation of scanning point with the method of the maximum circumcircle to get the CMM measurements of the internal micrometer with three-point contact in different diameter positions. Second, use the internal micrometer with three-point contact to measure any standard ring gauges within its measuring range to get the indicating value which is also named as reference point indicating value. Third, analyze the diameter value got by using the CMM to measure the internal micrometer with three-point contact in different positions and the reference point indicating value. After data processing, the error of indication in different positions can be got. Last, analyze the uncertainty of measurement to test its feasibility.

Citation Download Citation

Rui tao Sui "Calibration method for large internal micrometer with three-point contact", Proc. SPIE 7544, Sixth International Symposium on Precision Engineering Measurements and Instrumentation, 754413 (28 December 2010); https://doi.org/10.1117/12.885288

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available