A high-temperature acoustic-electric system for power delivery and data communication through thick metallic barriers

T. J. Lawry; K. R. Wilt; S. Roa-Prada; J. D. Ashdown; G. J. Saulnier; H. A. Scarton; P. K. Das; A. J. Gavens

doi:10.1117/12.884014

17 May 2011 A high-temperature acoustic-electric system for power delivery and data communication through thick metallic barriers

T. J. Lawry, K. R. Wilt, S. Roa-Prada, J. D. Ashdown, G. J. Saulnier, H. A. Scarton, P. K. Das, A. J. Gavens

Author Affiliations +

Proceedings Volume 8035, Energy Harvesting and Storage: Materials, Devices, and Applications II; 80351D (2011) https://doi.org/10.1117/12.884014
Event: SPIE Defense, Security, and Sensing, 2011, Orlando, Florida, United States

Abstract

In many sensing applications that monitor extreme environmental conditions within sealed metallic vessels, penetrating vessel walls in order to feed through power and data cables is impractical, as this may compromise a vessels structural integrity and its environmental isolation. Frequent servicing of sensing equipment within these environments is costly, so the use of batteries is strongly undesired and power harvesting techniques are preferred. Traditional electromagnetic power delivery and communication techniques, however, are highly ineffective in these applications, due to Faraday shielding effects from the metallic vessel walls. A viable, non-destructive alternative is to use piezoelectric materials to transmit power through thick metallic barriers acoustically. We present critical elements of a high-temperature battery-less sensor system prototype, including power harvesting, voltage regulation, and data communication circuitry able to operate up to 260°C. Power transmission is achieved by coaxially aligning a pair of high-temperature piezoelectric transducers on opposite sides of a thick steel barrier. Continuous-wave excitation of the outside transducer creates an acoustic beam that is captured by the opposite transducer, forming an acoustic-electric link for power harvesting circuitry. Simultaneously, sensor data can be transmitted out of the high-temperature environment by switching the electrical impedance placed across the leads of the inside transducer, creating a reflection-based amplitude modulated signal on the outside transducer. Transducer housing, loading, and alternatives for acoustic couplants are discussed. Measurement results are presented, and it was found that the system can harvest up to 1 watt of power and communicate sensor data up to 50 kbps, while operating at 260°C.

Citation Download Citation

T. J. Lawry, K. R. Wilt, S. Roa-Prada, J. D. Ashdown, G. J. Saulnier, H. A. Scarton, P. K. Das, and A. J. Gavens "A high-temperature acoustic-electric system for power delivery and data communication through thick metallic barriers", Proc. SPIE 8035, Energy Harvesting and Storage: Materials, Devices, and Applications II, 80351D (17 May 2011); https://doi.org/10.1117/12.884014

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available