Paper
22 February 2012 Simulation study on spectrum beam combining based on reflection volume Bragg grating
Yingyan Yi, Min Li
Author Affiliations +
Abstract
Single fiber laser can reach kilowatt level output. Higher power output is limited by nonlinear effect inside the fiber, heat deposition and pump power. Spectral beam combining of multiple laser beams with offset wavelengths into a single near-diffraction-limited beam is an effective solution to increasing energy brightness and scaling output power of high-power lasers. The loss factors of effect on the diffraction efficiency of the gratings are discussed. Design principles and technical approach for spectral beam combining (SBC) of two channels and three channels by reflecting volume Bragg grating are investigated. Two and three channels SBC are numerically analyzed when the input beam divergence is 0.06mrad. The results show the SBC efficiencies are 98.65% and 97.57% when the spectral width is 0.1nm, and the efficiencies are 92.16% and 88.98% when the spectral width is 0.3nm, respectively.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yingyan Yi and Min Li "Simulation study on spectrum beam combining based on reflection volume Bragg grating", Proc. SPIE 8333, Photonics and Optoelectronics Meetings (POEM) 2011: Optoelectronic Devices and Integration, 83330O (22 February 2012); https://doi.org/10.1117/12.917294
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Diffraction

Diffraction gratings

Polarization

Absorption

Fiber Bragg gratings

Optical design

Refractive index

RELATED CONTENT

Compact cavity design in solid state resonators by way of...
Proceedings of SPIE (February 28 2014)
Volume Bragg lasers
Proceedings of SPIE (November 15 2010)
Resonant grating filters at oblique incidence
Proceedings of SPIE (November 03 2003)

Back to Top