Parallel, miniaturized scanning probe microscope for defect inspection and review

H. Sadeghian; T. C. van den Dool; W. E. Crowcombe; R. W. Herfst; J. Winters; G. F. I. J. Kramer; N. B. Koster

doi:10.1117/12.2045557

2 April 2014 Parallel, miniaturized scanning probe microscope for defect inspection and review

H. Sadeghian, T. C. van den Dool, W. E. Crowcombe, R. W. Herfst, J. Winters, G. F. I. J. Kramer, N. B. Koster

Proceedings Volume 9050, Metrology, Inspection, and Process Control for Microlithography XXVIII; 90501B (2014) https://doi.org/10.1117/12.2045557
Event: SPIE Advanced Lithography, 2014, San Jose, California, United States

Abstract

With the device dimensions moving towards the 1X node, the semiconductor industry is rapidly approaching the point where 10 nm defects become critical. Therefore, new methods for improving the yield are emerging, including inspection and review methods with sufficient resolution and throughput. Existing industrial tools cannot anymore fulfill these requirements for upcoming smaller and 3D features, since they are performing at the edge of their performance. Scanning probe microscopy (SPM) has the ability to accurately measure dimensions in the micrometer to nanometer scale. Examples of applications are surface roughness, channel height and width measurement, defect inspection in wafers, masks and flat panel displays. In most of these applications, the target area is very large, and, therefore, the throughput of the measurement plays an important role in the final production cost. Single SPM has never been able to compete with other inspection systems in terms of measurement speed, thus has not fulfilled the industry needs in throughput and cost. Further increase of the speed of the single SPM helps, but it still is far from the required throughput and, therefore, insufficient for high-volume manufacturing. Over the past three years, we have developed a revolutionary concept for a multiple miniaturized SPM heads system, which can inspect and measure many sites in parallel. The very high speed of each miniaturized SPM unit allow the user to scan many areas, each with the size of tens of micrometers, in a few seconds. This paper presents an overview of the technical developments and experimental results of the parallel SPM system for wafer and mask inspection.

Citation Download Citation

H. Sadeghian, T. C. van den Dool, W. E. Crowcombe, R. W. Herfst, J. Winters, G. F. I. J. Kramer, and N. B. Koster "Parallel, miniaturized scanning probe microscope for defect inspection and review", Proc. SPIE 9050, Metrology, Inspection, and Process Control for Microlithography XXVIII, 90501B (2 April 2014); https://doi.org/10.1117/12.2045557

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available