Construction of CHESS compact undulator magnets at Kyma

Alexander B. Temnykh; Aaron Lyndaker; Mirko Kokole; Tadej Milharcic; Jure Pockar; Raffaella Geometrante

doi:10.1117/12.2186301

12 May 2015 Construction of CHESS compact undulator magnets at Kyma

Alexander B. Temnykh, Aaron Lyndaker, Mirko Kokole, Tadej Milharcic, Jure Pockar, Raffaella Geometrante

Proceedings Volume 9512, Advances in X-ray Free-Electron Lasers Instrumentation III; 951205 (2015) https://doi.org/10.1117/12.2186301
Event: SPIE Optics + Optoelectronics, 2015, Prague, Czech Republic

Abstract

In 2014 KYMA S.r.l. has built two CHESS Compact Undulator (CCU) magnets that are at present installed and successfully operate at the Cornell Electron Storage Ring. This type of undulator was developed for upgrade of Cornell High Energy Synchrotron Source beam-lines, but it can be used elsewhere as well. CCU magnets are compact, lightweight, cost efficient and in-vacuum compatible. They are linearly polarized undulators and have a fixed gap. Magnetic field tuning is achieved by phasing (shifting) top magnetic array relative bottom. Two CCUs constructed by KYMA S.r.l. have 28.4 mm period, 6.5 mm gap, 0.93 T peak field. Magnetic structure is of PPM type, made with NdFeB (40UH grade) permanent magnet material. Transitioning from the laboratory to industrial environment for a novel design required additional evaluation, design adjusting and extensive testing. Particular attention was given to the soldering technique used for fastening of the magnetic blocks to holders. This technique had thus far never been used before for undulator magnet construction by industry. The evaluation included tests of different types of soldering paste, measurements of strength of solder and determining the deformations of the soldered magnet and holder under simulated loading forces. This paper focuses on critical features of the CCU design, results of the soldering technique testing and the data regarding permanent magnets magnetization change due to soldering. In addition it deals with optimization-assisted assembly and the performance of the assembled devices and assesses some of the results of the CCU magnets operation at CESR.

Citation Download Citation

Alexander B. Temnykh, Aaron Lyndaker, Mirko Kokole, Tadej Milharcic, Jure Pockar, and Raffaella Geometrante "Construction of CHESS compact undulator magnets at Kyma", Proc. SPIE 9512, Advances in X-ray Free-Electron Lasers Instrumentation III, 951205 (12 May 2015); https://doi.org/10.1117/12.2186301

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available