Mr. Linsen Shu Profile

Linsen Shu

at Shaanxi Univ. of Technology

SPIE Involvement:

Author

Publications (3)

This will count as one of your downloads.

You will have access to both the presentation and article (if available).

DOWNLOAD NOW

This content is available for download via your institution's subscription. To access this item, please sign in to your personal account.

Email or Username Forgot your username?

Password Forgot your password?

Show

Keep me signed in

No SPIE account? Create an account

Proceedings Article | 9 January 2023 Paper

Study on optimization method of multi-point combined adhesive process for optical plane mirror

Xiang-ke Zheng, Shi-fa Kang, Hua Li, Peng Wang, Xiaoyan Li, Lin-sen Shu

Proceedings Volume 12507, 1250718 (2023) https://doi.org/10.1117/12.2655549

KEYWORDS: Adhesives, Mirrors, Optical components, Finite element methods, Precision optics, Optical testing, Optical fabrication equipment, Device simulation, Space mirrors

Read Abstract +

In order to quickly obtain the optimal bonding styles in the adhesive bonded mirror, the simulation and experimental study of the adhesive bonding assembly process for plane mirror were carried out. A single-factor experiment was designed to study the variation of the PV and RMS values of the surface-shape of optical plane mirror with the change of various factors. Then, an orthogonal experiment was designed to study the optimal parameters for the optimal bonding process by taking the PV and RMS of the surface-shape as comprehensive indexes. A finite element model named "Mirror-Adhesive -Frame" was developed using ANSYS Parametric Design Language (APDL) to calculate the PV and RMS values of the surface-shape of the mirror after bonding. In addition, a interference instrument named ZYGO is used to verify the correctness of the surface shape from simulation. The results show that the prediction results of the developed simulation model are in good agreement with the measurement results. The values of surface shape index PV and RMS increase with the increase of adhesive layer diameter and thickness, and gradually decrease with the increase of adhesive layer position in R direction and H direction. The orthogonal experiment with four factors and three levels revealed that the diameter of adhesive layer is the main factor to change the shape of the surface. The optimal process parameters are as follows: adhesive layer diameter of Φ4mm, adhesive layer thickness of 0.1 mm. adhesive layer position in R-direction of 40 mm and adhesive layer position in H-direction of 9.5mm.

Proceedings Article | 27 March 2022 Paper

Simulation and experimental investigation on linear expansion micro-stress assembly process of adhesive bonded mirror

Xiang-ke Zheng, Shi-fa Kang, Peng Wang, Hua Li, Lin-sen Shu

Proceedings Volume 12169, 121693A (2022) https://doi.org/10.1117/12.2623637

KEYWORDS: Adhesives, Mirrors, Finite element methods, Mirror structures, Optical components, Interferometers

Read Abstract +

In order to quickly obtain the effect of different bonding process on the surface-shape of the adhesive bonded mirror, the simulation and experimental study of the linear expansion micro-stress assembly process were carried out.The mathematical expression of the solidification micro-stress of the adhesive in plane mirror assembly is derived based on the volume shrinkage rate. The structural stiffness of the mirror and the frame is also taken into the mathematical expression of the micro-stress.A finite element model named "Mirror-Adhesive -Frame" was developed using ANSYS Parametric Design Language (APDL) and User Interface Design Language (UIDL) to calculate the PV and RMS values of the surface-shape of the mirror after bonding.The ZYGO interferometer is used to measure the PV and RMS values of the surface-shape index before and after the bonding of the mirror with a specification of Φ100mm-15mm. By comparing the experimental results and the simulation results, the correction value of the equivalent linear expansion parameter of the adhesive layer is obtained. Then, the corrected equivalent linear expansion coefficient of the adhesive layer is brought into the simulation model to predict the PV and RMS values. The results show that the prediction results of the developed simulation model are in good agreement with the measurement results. Moreover, it is found that when the circumference and back of the mirror are both bonded, the PV and RMS values of the surface-shape reach the maximum, and the PV and RMS values are 0.187λ and 0.044λ, respectively

Proceedings Article | 15 February 2022 Paper

Study on adhesive curing process and bonding property of XM-31 silicone rubber

Xiangke Zheng, Peng Wang, Shifa Kang, Zhanjun Duan, Xin Jia, Linsen Shu

Proceedings Volume 12166, 121660R (2022) https://doi.org/10.1117/12.2606857

KEYWORDS: Adhesives, Optical components, Mirrors, Solids, Silicon, Stars, Temperature metrology, Liquids, Standards development

Read Abstract +

In order to obtain the microstress bonding curing process and its properties of precision optical components, various curing process schemes of XM-31 adhesive were designed and tested. Firstly, a mirror group simulation structure and hardness testing tool were developed to study the effect of the amount of six vulcanizing agents on the solidification rate of XM-31 adhesive. Secondly, the XM-31 adhesive with the best amount of curing agent was solidified under different temperature conditions.Densitometer, stretch machine, hardness tester and microscope were used to test the material properties of XM-31 adhesive after curing, so as to obtain the bonding performance of XM-31 adhesive under different solidification temperature conditions.Finally, the optimized process is applied to the bonding of optical elements in a star - sensitive lens. The results show that the optimum ratio of matrix adhesive and vulcanizing agent of XM-31 adhesive is 100:3 ~ 100:4. The volume shrinkage rate of XM-31 adhesive under four curing temperatures were 1.82%, 1.75%, 1.63% and 1.43%, respectively. The curing temperature will significantly improve the adhesive process efficiency, but the adhesive strength and hardness will be reduced. The surface shape index PV and RMS value of a certain type of star sensitive lens can meet the design requirements, when using the preferred process of XM-31 adhesive assembly.

My Library

You currently do not have any folders to save your paper to! Create a new folder below.

Folder Name

Folder Description

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks. You are receiving this notice because your organization may not have SPIE eBooks access.*

*Shibboleth/Open Athens users─please sign in to access your institution's subscriptions.

To obtain this item, you may purchase the complete book in print or electronic format on SPIE.org.

ORGANIZATIONAL
Sign in with credentials provided by your organization.

Organizational Username

Organizational Password

Show/Hide Password

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members:

Non-members: ADD TO CART

Keywords/Phrases

Search In:

Publication Years