Laser Metal Deposition (LMD) is an additive manufacturing process that reaches high deposition rates. Its applications are mainly found in repair, cladding and manufacturing. The two commonly used LMD processes are powder-based (LMDp) and wire-based (LMD-w). Despite the fact that wire-based LMD uses material more efficiently, its process stability is a major concern. One approach to increase the process stability is superposing a pulsed laser (pw) beam with the conventionally used continuous laser (cw). Previous studies have shown that the metal vapor caused by pulsed laserinduced evaporation in the process zone significantly improves energy absorption. Furthermore, a direct relation between vapor pressure and melt pool form has been demonstrated. In this contribution, we correlate the pw-controlled melt pool geometry to process stability. High-speed camera imaging is employed to evaluate the dynamic melt pool behavior as a function of pw frequency and power. It is shown that irregular melt pool oscillations impairing process stability in conventional LMD-w are reduced if the pulsed laser is added. The melt front is shaped depending on the acting pw-induced pressure. This leads to a more stable interaction between wire and melt pool. Furthermore, the pw pressure changes the welding bead height and width. This cross-sectional geometry has an impact on the resulting waviness in 3D build-up. We also investigate how the waviness influences process stability during multilayer LMD-w. The results demonstrate that the dual beam technology is a promising way to develop more reliable and resource-efficient AM processes.
Laser Metal Deposition (LMD) is a high deposition rate metal Additive Manufacturing process. Its applications are basically repair, cladding and manufacturing. The two most commonly used LMD processes are powder-based (LMD-p) and wire-based (LMD-w). Despite the fact that wire-based LMD is more material efficient, process stability is a major concern. By adding a modulated laser beam to the continuous process beam, a change of the melt pool geometry and increased energy absorption are observed. This relation shows great potential to increase process stability. In this contribution, the positive effect of the dual laser-beam use on LMD-w processes is demonstrated. To understand the cause-effect relation, the workpiece temperature field was investigated by optical backscatter reflectometry (OBR). The results were then correlated to simultaneously performed IR camera measurements of the workpiece’s upper surface. By better understanding the thermal phenomena in dual-beam LMD, research can improve process temperature control. This leads to a new perspective for the LMD-w manufacturing process in many industry sectors such as mobility, energy and engineering.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.