Mr. Steven C. Irick Profile

Steven C. Irick

Staff Scientist

SPIE Involvement:

Author

Publications (19)

Proceedings Article | 20 September 2007 Paper

Paper

Flat-field calibration of CCD detector for long trace profiler

Jonathan Kirschman, Edward Domning, Keith Franck, Steven Irick, Alastair MacDowell, Wayne McKinney, Gregory Morrison, Brian Smith, Tony Warwick, Valeriy Yashchuk

Proceedings Volume 6704, 67040J (2007) https://doi.org/10.1117/12.732618

KEYWORDS: Sensors, Calibration, Cameras, CCD image sensors, CCD cameras, Charge-coupled devices, Photodiodes, X-ray optics, Personal digital assistants, Image resolution

Read Abstract +

Proceedings Article | 20 September 2007 Paper

Paper

New procedures for the adjustment of elliptically bent mirrors with the long trace profiler

Wayne McKinney, Steven Irick, Jonathan Kirschman, Alastair MacDowell, Tony Warwick, Valeriy Yashchuk

Proceedings Volume 6704, 67040G (2007) https://doi.org/10.1117/12.736860

KEYWORDS: Mirrors, Ray tracing, Wavefronts, Geometrical optics, Computer programming, Metrology, Monochromatic aberrations, Error analysis, Synchrotron radiation, X-rays

Read Abstract +

Proceedings Article | 29 August 2006 Paper

Paper

Air convection noise of pencil-beam interferometer for long trace profiler

Valeriy Yashchuk, Steve Irick, Alastair MacDowell, Wayne McKinney, Peter Takacs

Proceedings Volume 6317, 63170D (2006) https://doi.org/10.1117/12.681297

KEYWORDS: Convection, Fluctuations and noise, Mirrors, Laser stabilization, Information operations, Interferometers, Optical testing, Semiconductor lasers, Beam analyzers, X-ray optics

Read Abstract +

Proceedings Article | 17 September 2005 Paper

Paper

Cross-check of different techniques for two-dimensional power spectral density measurements of x-ray optics

Valeriy Yashchuk, Steve Irick, Eric Gullikson, Malcolm Howells, Alastair MacDowell, Wayne McKinney, Farhad Salmassi, Tony Warwick

Proceedings Volume 5921, 59210G (2005) https://doi.org/10.1117/12.619892

KEYWORDS: Mirrors, Modulation transfer functions, Spatial frequencies, X-rays, Scattering, Atomic force microscopy, X-ray optics, Interferometry, Microscopes, Surface finishing

Read Abstract +

Proceedings Article | 29 August 2005 Paper

Paper

Two-dimensional power spectral density measurements of x-ray optics with the Micromap interferometric microscope

Valeriy Yashchuk, Andrew Franck, Steve Irick, Malcolm Howells, Alastair MacDowell, Wayne McKinney

Proceedings Volume 5858, 58580A (2005) https://doi.org/10.1117/12.612383

KEYWORDS: Modulation transfer functions, Spatial frequencies, Mirrors, Microscopes, Sensors, X-ray optics, Objectives, Information operations, Interferometry, X-rays

Read Abstract +

Proceedings Article | 27 August 2005 Paper

Paper

Elimination of ‘ghost’-effect-related systematic errors in metrology of x-ray optics with a long trace profiler

Valeriy Yashchuk, Steve Irick, Alastair MacDowell

Proceedings Volume 5858, 58580X (2005) https://doi.org/10.1117/12.612386

KEYWORDS: Mirrors, Beam splitters, Sensors, Metrology, Data acquisition, X-rays, X-ray optics, Software development, Fourier transforms, Reflection

Read Abstract +

Proceedings Article | 24 December 2002 Paper

Paper

Nickel-plated invar mirrors for synchrotron radiation beam lines

Malcolm Howells, P. Burt, Daniela Cambie, Robert Duarte, A. Franck, Steven Irick, Alastair MacDowell, D. MacGill, R. Paquin, David Plate

Proceedings Volume 4782, (2002) https://doi.org/10.1117/12.453759

KEYWORDS: Mirrors, Plating, Nickel, Polishing, X-rays, Heat treatments, Surface finishing, Carbon, Manganese, Gemini Planet Imager

Read Abstract +

SPIE Journal Paper | 1 October 2000

Theory and practice of elliptically bent x-ray mirrors

Malcolm Howells, Daniela Cambie, Steven Irick, Alastair MacDowell, Howard Padmore, Timothy Renner, Seung Rah, Reuben Sandler

OE, Vol. 39, Issue 10, (October 2000) https://doi.org/10.1117/12.10.1117/1.1289879

KEYWORDS: Mirrors, X-rays, Monochromatic aberrations, Error analysis, Metals, Optical engineering, Polishing, Distortion, Manufacturing, Ceramics

Proceedings Article | 11 November 1999 Paper

Paper

Long trace profiler survey results

Steven Irick

Proceedings Volume 3782, (1999) https://doi.org/10.1117/12.369237

KEYWORDS: Mirrors, Laser induced plasma spectroscopy, Iron, Surface finishing, X-rays, Optical spheres, Data processing, Photovoltaics, Light sources, Aspheric lenses

Read Abstract +

Proceedings Article | 13 November 1998 Paper

Paper

Error reduction techniques for measuring long synchrotron mirrors

Steven Irick

Proceedings Volume 3447, (1998) https://doi.org/10.1117/12.331122

KEYWORDS: Mirrors, Laser beam diagnostics, Prisms, Calibration, Synchrotrons, X-rays, Interferometers, Optical testing, Interference (communication), Beam splitters

Read Abstract +

Proceedings Article | 13 November 1998 Paper

Paper

Design, analysis, and performance of an epoxy-bonded bendable mirror

Neal Hartman, Philip Heimann, Alastair MacDowell, Keith Franck, Andrew Grieshop, Steven Irick, Howard Padmore

Proceedings Volume 3447, (1998) https://doi.org/10.1117/12.331128

KEYWORDS: Mirrors, Adhesives, Silicon, Epoxies, Etching, Finite element methods, X-rays, Aerospace engineering, Thermal modeling, Light sources

Read Abstract +

Proceedings Article | 1 November 1997 Paper

Paper

New schemes in the adjustment of bendable elliptical mirrors using a long trace profiler

Seung Rah, Scott Locklin, Steven Irick, Malcolm Howells

Proceedings Volume 3152, (1997) https://doi.org/10.1117/12.295552

KEYWORDS: Mirrors, X-rays, Surface finishing, Synchrotrons, Monochromatic aberrations, Optics manufacturing, Polishing, Error analysis, Light sources, Collimation

Read Abstract +

Proceedings Article | 1 November 1997 Paper

Paper

Construction and performance of a 1-m-long elliptically bent steel mirror

Timothy Renner, Keith Franck, Malcolm Howells, Steven Irick, Howard Padmore, Seung Rah

Proceedings Volume 3152, (1997) https://doi.org/10.1117/12.295558

KEYWORDS: Mirrors, Polishing, Manufacturing, Nickel, X-rays, Chlorine, Tolerancing, Electron microscopes, Carbon, Surface finishing

Read Abstract +

Proceedings Article | 16 October 1997 Paper

Paper

Comparison of three different ray trace programs for x-ray and infrared synchrotron beamline designs

Steven Irick, Christian Jung

Proceedings Volume 3153, (1997) https://doi.org/10.1117/12.290253

KEYWORDS: Synchrotrons, Infrared radiation, Ray tracing, Mirrors, X-rays, Optical design, Thermal modeling, Light sources, Human-machine interfaces, Computing systems

Read Abstract +

Proceedings Article | 22 November 1996 Paper

Paper

New schemes for producing high-accuracy elliptical x-ray mirrors by elastic bending

Howard Padmore, Malcolm Howells, Steven Irick, Timothy Renner, Reuben Sandler, Y.-M. Koo

Proceedings Volume 2856, (1996) https://doi.org/10.1117/12.259867

KEYWORDS: Mirrors, X-rays, Chlorine, X-ray diffraction, Glasses, Surface finishing, Monochromatic aberrations, Beam shaping, Grazing incidence, Polishing

Read Abstract +

Proceedings Article | 20 June 1995 Paper

Paper

Preadjustment of small elliptical bender mirrors for an x-ray beamline

Steven Irick

Proceedings Volume 2515, (1995) https://doi.org/10.1117/12.212626

KEYWORDS: Mirrors, X-rays, Interferometry, Metrology, Light sources, Manufacturing, Grazing incidence, Integration, Tolerancing, Synchrotrons

Read Abstract +

Proceedings Article | 20 January 1993 Paper

Paper

XUV synchrotron optical components for the Advanced Light Source: summary of the requirements and the developmental program

Wayne McKinney, Steven Irick, David Lunt

Proceedings Volume 1740, (1993) https://doi.org/10.1117/12.138697

KEYWORDS: Mirrors, Synchrotron radiation, Optical components, Optical spheres, Synchrotrons, Spherical lenses, Nickel, Polishing, Optics manufacturing, Light sources

Read Abstract +

Proceedings Article | 20 October 1992 Paper

Paper

Advancements in one-dimensional profiling with a long-trace profiler

Steven Irick, Wayne McKinney

Proceedings Volume 1720, (1992) https://doi.org/10.1117/12.132173

KEYWORDS: Distortion, Mirrors, Fourier transforms, Detector arrays, Profiling, Lens design, Optical testing, Synchrotrons, Ceramics, Optical design

Read Abstract +

Proceedings Article | 1 July 1991 Paper

Paper

Wavemeter for tuning solid state lasers

Joseph Goad, Pamela Rinsland, Edward Kist, Steven Irick

Proceedings Volume 1410, (1991) https://doi.org/10.1117/12.43590

KEYWORDS: Solid state lasers, Interferometers, Data modeling, Electronics, Computer simulations, Atmospheric laser remote sensing, Photodiodes, Tunable lasers, Laser stabilization, Signal processing

Read Abstract +

Showing 5 of 19 publications

SIGN IN TO:

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Advertisement

Advertisement