From Event: SPIE Photomask Technology + EUV Lithography, 2021
High Numerical Aperture (NA) EUV lithography will require very thin resist films. This reduction in thickness will challenge most metrology techniques, except for Atomic Force Microscopy (AFM). Indeed, thinner resist films allow AFM to reach a better depth accuracy and a higher throughput. In this work, we demonstrate the capabilities of AFM metrology on 16-nm half-pitch resist lines obtained with 5 resist film thicknesses ranging from 10 to 30 nm. As we show, AFM provides relevant information about the pattern dimensions (resist height, line top roughness) as a function of exposure dose, and even about the bottom trench roughness on films with thickness < 10 nm.
© (2021) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A. Moussa, J. Severi, G. F. Lorusso, D. De Simone, and A.-L. Charley, "High NA EUV: a challenge for metrology, an opportunity for atomic force microscopy," Proc. SPIE 11854, International Conference on Extreme Ultraviolet Lithography 2021, 1185410 (Presented at SPIE Photomask Technology + EUV Lithography: September 30, 2021; Published: 12 October 2021); https://doi.org/10.1117/12.2601677.