Paper
4 October 1979 Electro-Optical Technique for Suppressing Vibration-Induced Line-Of-Sight Errors
Robert L. Light, Jackson H. Priest, Larry D. McTigue
Author Affiliations +
Proceedings Volume 0187, System Aspects of Electro-optics; (1979) https://doi.org/10.1117/12.965585
Event: 1979 Huntsville Technical Symposium, 1979, Huntsville, United States
Abstract
An optical path error suppression system was developed for a helicopter-mounted pointing and tracking system. Tests show the system can measure both static (thermal) and dynamic (vibration) angular changes of less than 5 microradians (1 arc second) between the folding mirror surfaces in the optical path line of sight. Collimated rays from a pulsed laser diode are projected along the optical path. A dichroic mirror returns the diode wavelength to a detector. The detector signals are processed into elevation and azimuth angular error components. A feedback controller converts the error signals into corrective commands to the servo-driven stabilized mirror. Tests of the system which simulated the helicopter vibration environment showed RMS line-of-sight errors were reduced from 56 µR to 7 µR, an improvement of 800%.
© (1979) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Robert L. Light, Jackson H. Priest, and Larry D. McTigue "Electro-Optical Technique for Suppressing Vibration-Induced Line-Of-Sight Errors", Proc. SPIE 0187, System Aspects of Electro-optics, (4 October 1979); https://doi.org/10.1117/12.965585
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Signal processing

Mirrors

Video

Mirror stabilization

Signal detection

Collimation

Back to Top