Paper
12 May 2017 Preparation and calibration of CsI photocathode and its x-ray imaging performance for high power laser interaction with Au foams at SGIII facility
Yukun Li, Long Fan, Tao Chen, Bo Deng, Jin Li, Keli Deng, Xin Hu
Author Affiliations +
Proceedings Volume 10173, Fourth International Symposium on Laser Interaction with Matter; 101730Y (2017) https://doi.org/10.1117/12.2268283
Event: 4th International Symposium on Laser Interaction with Matter, 2016, Chengdu, China
Abstract
We used a 300nm polycarbonate (PC) membrane as a supported structure and CsI photocathode was evaporated onto PC surface. The thickness of CsI can be controlled between 100 nm to 1 μm. The effects of deposition speed and deliquescence property on morphology and structure were analyzed. The photoelectric conversion properties of CsI films were analyzed with Manson X-ray source. The energy spectral response peak value of photocathode is above 3000μA/W calibrated at Beijing synchrotron radiation facility. The photocathode was applied to an X-ray streak camera on SG III facility and distinct x-ray images were captured.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yukun Li, Long Fan, Tao Chen, Bo Deng, Jin Li, Keli Deng, and Xin Hu "Preparation and calibration of CsI photocathode and its x-ray imaging performance for high power laser interaction with Au foams at SGIII facility", Proc. SPIE 10173, Fourth International Symposium on Laser Interaction with Matter, 101730Y (12 May 2017); https://doi.org/10.1117/12.2268283
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Gold

X-rays

Foam

Calibration

X-ray imaging

High power lasers

Crystals

Back to Top