Many existing and emerging remote sensing applications in the UV, Visible, NIR, SWIR, MWIR and LWIR regions are challenging the conventional thinking of radiance and temperature calibration techniques. While the relationship between blackbody temperature and optical radiation is well understood, often there is an “invisible” dividing line between treatments of these values as either optical radiance or temperature. It is difficult to perform seamless temperature and radiance calibrations across the point of 2.5um. Spectrum above 2.5um is typically related in temperature terms and below 2.5um may be either spoken of in terms of temperature or optical radiance. There is also a natural unit “convergence” issue at 2.5um, due to the crossover of significant levels of emissivity, reflectance and temperature at this point. NMI traceability in the spectral region of 2.5-14.0um can also be a problem especially for spectral radiance. This paper will outline a possible turn-key test bench solution that provides traceable solutions for both temperature and radiance value in these regimes. The intent of this paper is to offer a possible solution and challenge the infrastructure that exists today over the 0.3-14um range in order to obtain a valid spectral radiance or temperature value, or both, to support emerging sensor fusion technology.
|