Paper
23 April 2017 Rayleigh-based distributed temperature sensing and fiber Bragg grating point temperature sensing with a single optical fiber on high electrical potential of 1 MV
Author Affiliations +
Proceedings Volume 10323, 25th International Conference on Optical Fiber Sensors; 1032365 (2017) https://doi.org/10.1117/12.2263288
Event: 25th International Conference on Optical Fiber Sensors, 2017, Jeju, Korea, Republic of
Abstract
A temperature measurement of a high voltage bushing (HV-Bushing) is presented. An optical fiber with several inscribed Fiber Bragg Gratings (FBGs) was used to measure the temperature at given positions and a Rayleigh-based measurement technique was used to measure the temperature (profile) between the FBGs. The used optical frequencies for the FBG and Rayleigh measurement had to be separated to achieve good results. Voltages of up to 1 MV were applied to the HV-Bushing during the measurement.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
T. Ringel, M. Willsch, and T. Bosselmann "Rayleigh-based distributed temperature sensing and fiber Bragg grating point temperature sensing with a single optical fiber on high electrical potential of 1 MV", Proc. SPIE 10323, 25th International Conference on Optical Fiber Sensors, 1032365 (23 April 2017); https://doi.org/10.1117/12.2263288
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber Bragg gratings

Temperature metrology

Optical fibers

Backscatter

Sensors

Geometrical optics

Power supplies

Back to Top