Paper
26 June 2017 A flexible, simple telecentric three dimensional measurement system
Tong Chen, Jindong Tian, Yong Tian, Jianmei Wu, Dong Li
Author Affiliations +
Abstract
Calibration which defines the relationship between the phase and depth data is the important part of the fringe projection profilometry. In practice, the inherently nonlinear and spatially variable relationship between the absolute phase of the projected fringe and the object surface depth without using telecentric lens make calibration problematic in the measurement of small object. In order to obtain this problem, a flexible, simple telecentric three dimensional measurement system is proposed. Because of the characteristic that the size of object will not change with depth in telecentric imaging, the absolute phase is linear with the depth and the process of calibration become simpler. The experiment result indicate that the standard deviation of calibration result at z coordinate is within 5 μm, while that at x and y coordinate is within 3 μm. Three-dimensional shape reconstruction of a coin value ¥1 and measurement of central circle points of the calibration target further verify the validity of the proposed calibration method.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tong Chen, Jindong Tian, Yong Tian, Jianmei Wu, and Dong Li "A flexible, simple telecentric three dimensional measurement system", Proc. SPIE 10330, Modeling Aspects in Optical Metrology VI, 103300H (26 June 2017); https://doi.org/10.1117/12.2270126
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Calibration

3D metrology

Imaging systems

Cameras

3D modeling

Distortion

3D acquisition

RELATED CONTENT

Low-cost structured-light based 3D capture system design
Proceedings of SPIE (March 06 2014)
Measurement error analysis of the 3D four-wheel aligner
Proceedings of SPIE (October 10 2013)
A measurement error evaluation method of videometrics
Proceedings of SPIE (August 18 2011)
Ray-based generic digital projector calibration
Proceedings of SPIE (January 12 2012)
A new planar pattern for camera calibration
Proceedings of SPIE (September 24 2011)

Back to Top