Spherical Vacuum - Interface Window With Axial - Flow Impingement Cooling

Glenda S. Holderbaum; Richard J Phillips

doi:10.1117/12.951355

11 July 1989 Spherical Vacuum - Interface Window With Axial - Flow Impingement Cooling

Glenda S. Holderbaum, Richard J Phillips

Author Affiliations +

Proceedings Volume 1047, Mirrors and Windows for High Power/High Energy Laser Systems; (1989) https://doi.org/10.1117/12.951355
Event: OE/LASE '89, 1989, Los Angeles, CA, United States

Abstract

A spherical vacuum - interface window and an axial - flow impingement cooling system for high - energy laser applications are described. The vacuum - interface window is a 65 - cm diameter, 0.5 - cm thick, fused silica dome with a 10° edge angle. Both window optical surfaces are coated with anti - reflective coatings. Finite element analysis techniques were used to determine window thermal, structural, and optical performance characteristics for both uniform and Gaussian, 50 - cm diameter laser beam profiles. The axial - flow impingement cooling system provides convective cooling on a window surface. Helium gas is drawn into a throat duct, flows axially towards the window, impinges the window, and then flows radially outwards through a diffuser. Thermal, fluid, and optical performance testing was performed on a sub - scale apparatus to optimize convective cooling, minimize pumping power, and determine optical path distortion. A 40% scale factor was selected based on similitude. For the configurations tested, a diffuser angle of 30 degrees and a diffuser gap width to duct radius ratio of 0.3 maximized heat transfer with a Nusselt number of 610 at a flow Reynolds number of 740,000. This Nusselt number corresponds to a 30 - second thermal response time constant for the window. A gap width ratio of 0.4 minimized pumping power but at a 20% reduction in heat transfer. Use of turbulence promoters in the throat duct can increase convective cooling by 50%.

Citation Download Citation

Glenda S. Holderbaum and Richard J Phillips "Spherical Vacuum - Interface Window With Axial - Flow Impingement Cooling", Proc. SPIE 1047, Mirrors and Windows for High Power/High Energy Laser Systems, (11 July 1989); https://doi.org/10.1117/12.951355

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE