Paper
8 May 2018 Three mirror off-axis optical system with an obscuration hole as a fore optics of the hyperspectral imager
Author Affiliations +
Abstract
A three-mirror off-axis optical system was designed as a fore optics of a hyperspectral imager. The secondary mirror (M2) has an obscuration hole in the middle for the slit assembly. Despite of the disadvantages of having a slit hole in the mirror surface such as stray light defect and mirror surface fabrication difficulty, the configuration has great advantages of maximizing telecentricity while maintaining the wide field of view (FOV). [1] To evaluate the integrity of the optical system design, the stray light effect was analyzed including the spectrometer channel and confirmed that it has little effect on the image performance. Also, the RMS wave front error (WFE) of M2 is measured to be 20.12 nm exceeding our expectation including the edge of the hole. As a result, the optical system is aligned to have WFE less than 90 nm RMS in all fields. [1]
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Youngsoo Kim, Jinsuk Hong, Byeongin Choi, and Yeonsoo Kim "Three mirror off-axis optical system with an obscuration hole as a fore optics of the hyperspectral imager", Proc. SPIE 10644, Algorithms and Technologies for Multispectral, Hyperspectral, and Ultraspectral Imagery XXIV, 106441B (8 May 2018); https://doi.org/10.1117/12.2284765
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Monochromatic aberrations

Optical design

Alignment procedures

Optical alignment

Optics manufacturing

Sensors

RELATED CONTENT


Back to Top