Paper
14 May 2018 Pre-processing and extraction techniques for vital signs analysis from phonocardiographic-based interferometric fiber-optic sensor
Author Affiliations +
Abstract
This paper deals with methods for processing signals from an optical interferometer to monitor vital signs (Respiration Rate and Heart Rate). Optical interferometer signals are contaminated by variety of technical and biological artifacts (motion artifacts, hospital/patient-generated noise, etc.). Tested optical sensors are very sensitive, it therefore crucial to reduce such unwanted signals. In this article, a complex application for processing the signals from optical interferometer based on virtual instrumentation was developed. The experiments were conducted on data sensed by optical interferometer using a National Instruments card NI USB-6216 BNC and application in the LabVIEW environment. Frequency selective filters were tested in the experiments. The results obtained by using optical interferometer were statistically compared with the ECG and PCG reference. According to the results, optical interferometers are able to measure both the Respiration and Heart Rate under the given conditions. Unfortunately, the measurement is very difficult to replicate in the hospital environment, which is the primary reason why these methods are not used in clinical practice.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Radek Martinek, Radana Kahankova, Nela Strbikova, Jakub Cubik, Stanislav Kepak, Marcel Fajkus, Jan Nedoma, Martin Novak, and Jan Jargus "Pre-processing and extraction techniques for vital signs analysis from phonocardiographic-based interferometric fiber-optic sensor", Proc. SPIE 10654, Fiber Optic Sensors and Applications XV, 106541E (14 May 2018); https://doi.org/10.1117/12.2304540
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Heart

Interferometers

Signal processing

Optical fibers

Electrocardiography

Sensors

Wavelets

Back to Top