Surface finish and diamond tool wear when machining PMMA and PC optics

Charan Bodlapati; Thomas Dow; Anthony Wong; Ken Garrard

doi:10.1117/12.2319683

14 September 2018 Surface finish and diamond tool wear when machining PMMA and PC optics

Charan Bodlapati, Thomas Dow, Anthony Wong, Ken Garrard

Proceedings Volume 10742, Optical Manufacturing and Testing XII; 107420D (2018) https://doi.org/10.1117/12.2319683
Event: SPIE Optical Engineering + Applications, 2018, San Diego, California, United States

Abstract

Optical devices are extremely important since they play a critical role in optical recording and display. Single point diamond turning is one of the most common methods to create plastic optics. Diamond turning of plastics is influenced by a wide variety of factors such as the glass transition temperature of the polymer, other material properties and operator controlled cutting conditions. Since diamond is one of the hardest materials in nature and polymers are relatively soft, little tool wear is expected. But the optics industry claims that tool wear is a major problem. Most of the optical industry uses Poly (methyl methacrylate) (PMMA) and Polycarbonate (PC) for creating optics. The objective of this research is to optimize machining parameters (such as feed, depth of cut, cutting speed and rake angle) to produce optical surface quality (RMS Surface finish < 10 nm) while minimizing tool wear for the two materials. A wide range of experiments were performed on the two materials by varying machining parameters and measuring worn tools using the Electron Beam Induced Deposition (EBID) technique in the Scanning Electron Microscope (SEM). In the experimental conditions used, PMMA was found to have better surface finish than PC when machined with a zero-rake angle diamond tool. Polycarbonate was found to wear the tool more than PMMA under similar cutting conditions. It was also found that Polycarbonate is more sensitive to chip management and chip geometry than PMMA. Detailed effects of all machining parameters for the two materials were studied.

Conference Presentation

Citation Download Citation

Charan Bodlapati, Thomas Dow, Anthony Wong, and Ken Garrard "Surface finish and diamond tool wear when machining PMMA and PC optics", Proc. SPIE 10742, Optical Manufacturing and Testing XII, 107420D (14 September 2018); https://doi.org/10.1117/12.2319683

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available