Paper
31 August 2018 Automatic measurement method of large scale satellite antenna in planar near-field test
Li Tao, Changyu Long, Guowei Ruan, Wangmin Yi, Xiao Liu
Author Affiliations +
Proceedings Volume 10835, Global Intelligence Industry Conference (GIIC 2018); 108350D (2018) https://doi.org/10.1117/12.2503627
Event: Global Intelligent Industry Conference 2018, 2018, Beijing, China
Abstract
As the requirement of satellite antenna’s planar near-field test, the scanning plane, the air-bearing based platform and the satellite antenna should be measured and adjusted with high precision. In order to improve the measurement accuracy and efficiency for large scale objects, a new measurement method is proposed based on laser radar. Target ball measurement, scanning measurement and single point measurement are respectively used to measure the scanning plane, the air-bearing based platform and the satellite antenna. The working principle, automatic measurement method and measurement error are described in detail. The experimental results show that the measurement error is less than 0.1mm for 3D point coordinate and 10” for attitude angle. Compared with traditional theodolite measurement method, this method can realize automatic measurement with higher precision and efficiency.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Li Tao, Changyu Long, Guowei Ruan, Wangmin Yi, and Xiao Liu "Automatic measurement method of large scale satellite antenna in planar near-field test", Proc. SPIE 10835, Global Intelligence Industry Conference (GIIC 2018), 108350D (31 August 2018); https://doi.org/10.1117/12.2503627
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Antennas

LIDAR

Satellites

Near field

Laser systems engineering

3D metrology

Distance measurement

Back to Top