Presentation + Paper
7 March 2019 Dual-wavelength, cascaded cavities bismuth-doped fiber laser in 1.7μm wavelength range
Author Affiliations +
Abstract
A comprehensive theoretical investigation of a dual wavelength, cascade cavity bismuth-doped fiber (BDF) laser operating in the wavelength range of 1.7μm is presented. The fiber laser model is based on parameters extracted from experimental characterization of the BDF. The BDF serves as an active medium with optical gain in the wavelength region from 1.65μm to 1.8μm. The laser cavity is defined by a 90% mirror on one end of the BDF and two fiber Bragg gratings (FBG1 and FBG2) separated with the BDF on the other end of the laser cavity. One of the gratings FBG1 with the peak reflectivity 95% is centered at 1.725μm. The second one FBG2 with peak reflectivity of 90% is centered at 1.729μm. Both FBGs have a 3-dB bandwidth of ~0.5nm. It is shown that the cascade laser can operate at two 1.725μm and 1.729μm wavelengths with different powers depending on the parameters of the structure.
Conference Presentation
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Galina Nemova, Jinghao Qiao, Lawrence R. Chen, Sergei V. Firstov, and Evgeny M. Dianov "Dual-wavelength, cascaded cavities bismuth-doped fiber laser in 1.7μm wavelength range", Proc. SPIE 10897, Fiber Lasers XVI: Technology and Systems, 1089711 (7 March 2019); https://doi.org/10.1117/12.2509945
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber lasers

Fiber Bragg gratings

Quantum cascade lasers

Reflectivity

Data modeling

Absorption

Continuous wave operation

RELATED CONTENT

Single mode 1018nm fiber laser with power of 230W
Proceedings of SPIE (March 11 2016)
All fiber Q switched Er Yb co doped fiber ring...
Proceedings of SPIE (January 17 2005)
Linewidth of high-power fiber lasers
Proceedings of SPIE (August 04 2009)
Watt-level CW output from ceramic Cr2+:ZnSe laser
Proceedings of SPIE (February 06 2008)

Back to Top