Merging of imaging techniques based on reflectance hyperspectral and neutron tomography for characterization of a modern replica of a 13th century knife from Croatia

Francesco Grazzi; Costanza Cucci; Andrea Casini; Lorenzo Stefani; Nikolay Kardjilov; Adam Thiele; Jiři Hošek; Marcello Picollo

doi:10.1117/12.2526050

12 July 2019 Merging of imaging techniques based on reflectance hyperspectral and neutron tomography for characterization of a modern replica of a 13th century knife from Croatia

Francesco Grazzi, Costanza Cucci, Andrea Casini, Lorenzo Stefani, Nikolay Kardjilov, Adam Thiele, Jiři Hošek, Marcello Picollo

Author Affiliations +

Proceedings Volume 11058, Optics for Arts, Architecture, and Archaeology VII; 1105816 (2019) https://doi.org/10.1117/12.2526050
Event: SPIE Optical Metrology, 2019, Munich, Germany

Abstract

A large amount of iron and steel artifacts produced in the central European area between 2nd and 14th Centuries is constituted by pattern welded iron-phosphoric iron and steel components. Phosphoric iron is a substitutional alloy, which is obtained by using iron ore from swamps in which decomposition of dead organisms enriches the iron rich soil with phosphorous. The identification of phosphoric iron alloy in ancient artifacts is important for determining their place of origin, production procedure and technological characteristics. A well-established technique for investigating the bulk structure of ancient metallographic artifacts is neutron tomography, using cold neutrons. It provides image-data capable of enhancing differences between phosphorous rich iron and the standard iron areas. However, neutron imaging is costly and complex to implement. Therefore, the exploration of new techniques capable of providing additional data on the nature of alloys would be highly needed. A pilot study addressed to test the applicability of reflectance hyperspectral imaging to the investigation of ancient metallographic artifacts is presented here. So far this technique has been used for diagnostics of polychrome surfaces, but it has never been applied to investigation of metallic surfaces. Hyperspectral imaging in the VIS-NIR range (400-1700 nm) was applied on replicas of a historical object from the archaeological site of Kobilic (Croatia). The same replicas were analyzed also using neutron tomography. Hyperspectral data were elaborated to map the distribution of the different phases on the surface. The comparison of the hyperspectral data with the neutron tomography data-images provided prominent similarities. These preliminary results encourage further investigations on merging these two imaging techniques for novel applications on archeo-metallurgy.

Conference Presentation

Citation Download Citation

Francesco Grazzi, Costanza Cucci, Andrea Casini, Lorenzo Stefani, Nikolay Kardjilov, Adam Thiele, Jiři Hošek, and Marcello Picollo "Merging of imaging techniques based on reflectance hyperspectral and neutron tomography for characterization of a modern replica of a 13th century knife from Croatia", Proc. SPIE 11058, Optics for Arts, Architecture, and Archaeology VII, 1105816 (12 July 2019); https://doi.org/10.1117/12.2526050

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available