Presentation + Paper
20 February 2020 Transmission properties of dielectric-coated hollow optical fibers based on Ni-Ti tube
Author Affiliations +
Abstract
Ni-Ti tube is used as a supporting tube for the infrared hollow fiber to obtain flexibility and strong mechanical strength. In order to reduce roughness of inner surface of Ni-Ti tube which causes the additional transmission loss, an acrylic-silicon resin material is used as a buffer layer to the inner wall of Ni-Ti tube for a low-loss characteristic. For the dielectric inner-coating layer, cyclic olefin polymer (COP) is used to lower the transmission loss. The COP layer is formed by using liquid-phase coating method. The hollow fibers with optimized COP inner film thickness for CO2 laser light were fabricated and reasonable transmission losses was demonstrated.
Conference Presentation
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Katsumasa Iwai, Hiroyuki Takaku, Mitsunobu Miyagi, Yi-Wei Shi, Xiao-Song Zhu, and Yuji Matsuura "Transmission properties of dielectric-coated hollow optical fibers based on Ni-Ti tube", Proc. SPIE 11233, Optical Fibers and Sensors for Medical Diagnostics and Treatment Applications XX, 1123315 (20 February 2020); https://doi.org/10.1117/12.2542148
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silver

Gas lasers

Optical fibers

Fiber lasers

Carbon monoxide

Silicon

Polymers

Back to Top