9 March 2020Laser assisted powder bed fusion of hypereutectic Al-Si using ultra-short laser pulses at different pulse durations (Conference Presentation)
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
Laser assisted powder bed fusion of pure Aluminum and hypereutectic Al-Si using ultra-short laser pulses at different pulse lengths is presented. The experiments were carried out with a fiber laser system delivering pulses from 500 fs to 600 ps at a wavelength of 1030 nm and a repetition rate of 20 MHz. Time dependent reflectance measurements indicate that the absorption is increased towards shorter pulse durations. In comparison to longer pulses and cw radiation, powder bed fusion using ultra-short laser pulses lead to uniform structures at lower average powers yielding a homogeneous microstructure that exhibits optimized mechanical properties.
Tobias Ullsperger,Gabor Matthäus,Lisa Kaden,Brian Seyfarth,Dongmei Liu,Markus Rettenmayr, andStefan Nolte
"Laser assisted powder bed fusion of hypereutectic Al-Si using ultra-short laser pulses at different pulse durations (Conference Presentation)", Proc. SPIE 11271, Laser 3D Manufacturing VII, 112710M (9 March 2020); https://doi.org/10.1117/12.2545209
ACCESS THE FULL ARTICLE
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
The alert did not successfully save. Please try again later.
Tobias Ullsperger, Gabor Matthäus, Lisa Kaden, Brian Seyfarth, Dongmei Liu, Markus Rettenmayr, Stefan Nolte, "Laser assisted powder bed fusion of hypereutectic Al-Si using ultra-short laser pulses at different pulse durations (Conference Presentation)," Proc. SPIE 11271, Laser 3D Manufacturing VII, 112710M (9 March 2020); https://doi.org/10.1117/12.2545209