Paper
12 March 2020 Differences in calculation methods of effective emissivity of blackbody cavity
Author Affiliations +
Abstract
It is very difficult to directly measure the effective emissivity of a blackbody cavity, which is generally calculated by the indirect methods. Different calculation methods have certain differences. In this paper, the STEEP software, TRACEPRO software and approximation formula are used to calculate the effective emissivity of the blackbody cavity for the three commonly used blackbody models of integrating sphere, cylindrical and cylindrical-conical, and Compare the results of emissivity greater than 0.99. The results show that the consistency of the results of the three methods in calculating the cylindrical type and the integrating sphere type blackbody can be better than 0.03%. When calculating the conical black body, the difference between the results of the approximate formula and the other two schemes is less than 0.07%. The calculation results of the scheme tend to be consistent with the increase of the emissivity of the model.
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yuxuan Ma and Guojin Feng "Differences in calculation methods of effective emissivity of blackbody cavity", Proc. SPIE 11438, 2019 International Conference on Optical Instruments and Technology: Optoelectronic Imaging/Spectroscopy and Signal Processing Technology, 114380P (12 March 2020); https://doi.org/10.1117/12.2548082
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Black bodies

Integrating spheres

Optical spheres

Photometry

RELATED CONTENT

The warm calibration unit of METIS laboratory tests and...
Proceedings of SPIE (December 13 2020)
Photometry And Radiometry Of Diode Emitters: LEDs And IREDs
Proceedings of SPIE (January 16 1989)
ScaRaB ground calibration
Proceedings of SPIE (September 18 1997)
Visible/infrared radiometric calibration station
Proceedings of SPIE (September 14 1994)

Back to Top