Paper
12 March 2020 Non-contact continuous blood pressure measurement based on imaging equipment
Author Affiliations +
Abstract
An optical and non-contact continuous measurement method to detect human blood pressure through a high-speed camera is discussed in this paper. With stable ambient light, photoplethysmographic (PPG) signals of face and palm area are obtained simultaneously from the video captured by high-speed camera, whose frame rate should be higher than 100 frames per second. Pulse transit time (PTT) is measured from the R-wave distance between the two PPG signals. The Partial least squares regression( PLSR) model was established to train the samples, and the relationship between PTT and blood pressure, including intra-arterial systolic pressure (SBP) and diastolic pressure (DBP), was established to obtain blood pressure. Compared with the output of traditional sphygmomanometer, the blood pressure data collected from non-contact system has little error and meets the fitting conditions. We first proposed an accurate video-based method for non-contact blood pressure measurement using machine learning, and the average error of SBP is 0.148mmHg and of DBP is 0.359mmHg.
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ying Guo, Xiaohua Liu, Lingqin Kong, Ming Liu, Yuejin Zhao, and Liquan Dong "Non-contact continuous blood pressure measurement based on imaging equipment", Proc. SPIE 11438, 2019 International Conference on Optical Instruments and Technology: Optoelectronic Imaging/Spectroscopy and Signal Processing Technology, 1143802 (12 March 2020); https://doi.org/10.1117/12.2540316
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Blood pressure

Video

Electronic filtering

Error analysis

Filtering (signal processing)

High speed cameras

Statistical modeling

Back to Top