Paper
25 May 2022 Large mode area fibers for single-mode transmission near 2μm
Author Affiliations +
Abstract
The Large Mode Area (LMA) fibers are attractive in the field of new components in optical fiber technology in the field of sensing and novel radiation sources. The numerical analysis of multi-ring (multi trench) fiber construction is investigated for eye-safe transmission spectral range (1400-2100 nm). The optical fiber refractive profile construction of ∆n (0.001- 0.004) for different radial step ∆r (1.0-1.6 µm) is used for the investigation of linearly polarized modes (LP01 and LP11) propagation. The maximum mode field diameter (MFD) of LP01 was calculated. The results confirm the LMA propagation possibility in the presented fiber construction. The single-mode guiding was confirmed for different ∆n and ∆r parameters in the investigated spectral range. The cutoff wavelength <1400 nm and single-mode operation are possible for ∆n=0.001 and ∆r=1 µm.
© (2022) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Piotr Miluski, Marcin Kochanowicz, Jacek Zmojda, Agata Baranowska, Magdalena Leśniak, Dominik Dorosz, Krzysztof Markowski, and Jan Dorosz "Large mode area fibers for single-mode transmission near 2μm", Proc. SPIE 12142, Fiber Lasers and Glass Photonics: Materials through Applications III, 121420M (25 May 2022); https://doi.org/10.1117/12.2621971
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical fibers

Refractive index

Silica

Wave propagation

Fiber lasers

Signal attenuation

Laser damage threshold

RELATED CONTENT

Numerical modelling of nonlinear ellipse rotation
Proceedings of SPIE (October 21 2004)
Solid-core bandgap fibers
Proceedings of SPIE (February 22 2007)

Back to Top