Advances in 9xx nm edge-emitting high-power pulse laser diodes for LiDAR applications

C. Lauer; N. Kaufmann; A. Fröhlich; D. Schoke; A. Gocalinska; T. Swietlik; L. Fuchs; S. Pyka; M. Furitsch; M. Roth; S. Hein; S. Baumann; F. Eigenmann; P. Fuchs; J. Ebbecke; N. Steinbrück; J. Maric; B. Jentzsch; H. Halbritter; A. Gomez-Iglesias; M. Lermer; H. König; M. Behringer

doi:10.1117/12.2648401

14 March 2023 Advances in 9xx nm edge-emitting high-power pulse laser diodes for LiDAR applications

C. Lauer, N. Kaufmann, A. Fröhlich, D. Schoke, A. Gocalinska, T. Swietlik, L. Fuchs, S. Pyka, M. Furitsch, M. Roth, S. Hein, S. Baumann, F. Eigenmann, P. Fuchs, J. Ebbecke, N. Steinbrück, J. Maric, B. Jentzsch, H. Halbritter, A. Gomez-Iglesias, M. Lermer, H. König, M. Behringer

Author Affiliations +

Proceedings Volume 12403, High-Power Diode Laser Technology XXI; 1240306 (2023) https://doi.org/10.1117/12.2648401
Event: SPIE LASE, 2023, San Francisco, California, United States

Abstract

Progress in several fields has enabled the use of LiDAR sensing for a multitude of applications like autonomous driving, pre-crash sensors, gesture recognition, and environmental monitoring. All the applications demand challenging specifications of the sensing system components to achieve the required performance parameters detection range, angular resolution, eye-safety, and several others. In this work, we report on recent advances in our pulsed edge-emitting IR laser diodes, which can be used as laser light sources for scanning-beam and flash-mode time-of-flight LiDAR systems. We developed a technique to reduce the temperature-induced emission wavelength shift in our monolithically stacked epitaxial waveguides from 22nm to only 2.8nm over a heatsink temperature range from 25°C to 120°C, which is the crucial temperature range for many systems. Within this 95K range our Fabry-Perot edge-emitters feature a wavelength shift below the 7nm usually achieved in DFB type edge-emitters and VCSELs. There is no power penalty for the wavelength stabilization. We also demonstrate output power scaling by about 60% by increasing the number of waveguide stages in the stacked epitaxy structure from 3 to 5. This results in a short-pulse peak output power of 260W at 50A from a single device with an emission wavelength of 910nm and a near field width of about 220μm. Finally, we discuss the performance improvements of devices with 900μm and 1200μm long resonators compared to standard 600μm resonators. The demonstrated advances of the pulsed edge-emitting laser light sources enable various system improvements and widespread adoption of LiDAR sensing in many applications.

Conference Presentation

Citation Download Citation

C. Lauer, N. Kaufmann, A. Fröhlich, D. Schoke, A. Gocalinska, T. Swietlik, L. Fuchs, S. Pyka, M. Furitsch, M. Roth, S. Hein, S. Baumann, F. Eigenmann, P. Fuchs, J. Ebbecke, N. Steinbrück, J. Maric, B. Jentzsch, H. Halbritter, A. Gomez-Iglesias, M. Lermer, H. König, and M. Behringer "Advances in 9xx nm edge-emitting high-power pulse laser diodes for LiDAR applications", Proc. SPIE 12403, High-Power Diode Laser Technology XXI, 1240306 (14 March 2023); https://doi.org/10.1117/12.2648401

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE