Highly birefringent cladding fiber Bragg grating for simultaneous torsion and strain sensing at high temperature

Baijie Xu; Jun He; Xizhen Xu; Kuikui Guo; Changrui Liao; Yiping Wang

doi:10.1117/12.2654940

15 December 2022 Highly birefringent cladding fiber Bragg grating for simultaneous torsion and strain sensing at high temperature

Baijie Xu, Jun He, Xizhen Xu, Kuikui Guo, Changrui Liao, Yiping Wang

Author Affiliations +

Proceedings Volume 12478, Thirteenth International Conference on Information Optics and Photonics (CIOP 2022); 124784A (2022) https://doi.org/10.1117/12.2654940
Event: Thirteenth International Conference on Information Optics and Photonics (CIOP 2022), 2022, Xi'an, China

Abstract

Highly birefringent fiber Bragg grating have been widely used for multi-parameter measurements such as torsion and strain. Here, we propose and demonstrate a novel highly birefringent cladding fiber Bragg grating (Hi-Bi CFBG) fabricated for simultaneous measurement of torsion and strain at high temperature. After optimization of fabrication parameters, the Hi-Bi CFBG with a high birefringence of 2.2 × 10^-4and a low reflection less than 1% was successfully fabricated in a conventional single-mode fiber by using a femtosecond laser direct writing technology. This Hi-Bi CFBG consists of sawtooth periodic refractive index modulation fabricated in the fiber cladding. The significant polarization splitting of the reflection peak of the Hi-Bi CFBG is 233 pm induced by strong birefringence. And then, a simultaneous measurement of torsion and strain at high temperature of 700 °C was carry out, and the results show that the fiber torsion angle and direction can be deduced by monitoring the variation of the reflection difference between the two polarizationpeaks and the fiber strain can be detected by monitoring the wavelength shift of one of the polarization-peaks. The Hi-Bi CFBG exhibited a high torsion sensitivity of up to 80.02 dB/(deg/mm) and a strain sensitivity of 1.06 pm/με at high temperature of 700 °C. As such, the proposed femtosecond-laser-inscribed Hi-Bi CFBG can be used as a mechanical sensor in many areas, especially in intelligent health monitoring at extreme environments

Citation Download Citation

Baijie Xu, Jun He, Xizhen Xu, Kuikui Guo, Changrui Liao, and Yiping Wang "Highly birefringent cladding fiber Bragg grating for simultaneous torsion and strain sensing at high temperature", Proc. SPIE 12478, Thirteenth International Conference on Information Optics and Photonics (CIOP 2022), 124784A (15 December 2022); https://doi.org/10.1117/12.2654940

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
7 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Fiber Bragg gratings

Birefringence

Cladding

Femtosecond phenomena

Polarization

Temperature metrology

Refractive index

Show All Keywords

Keywords/Phrases

Search In:

Publication Years