Advances in manufacturing technology for low cost QCW diode laser stacks suitable for high energy pumping applications

Tobias Barnowski; Thilo Vethake; Katie Atwater; Tim Gong; Reza Razavi; Eric Zanghi; Ping Zhang; Stewart McDougall

doi:10.1117/12.3003308

12 March 2024 Advances in manufacturing technology for low cost QCW diode laser stacks suitable for high energy pumping applications

Tobias Barnowski, Thilo Vethake, Katie Atwater, Tim Gong, Reza Razavi, Eric Zanghi, Ping Zhang, Stewart McDougall

Author Affiliations +

Proceedings Volume 12867, High-Power Diode Laser Technology XXII; 1286713 (2024) https://doi.org/10.1117/12.3003308
Event: SPIE LASE, 2024, San Francisco, California, United States

Abstract

We report a novel approach for the assembly of monolithic diode laser stacks with up to 56 laser diode bars at 0.48mm pitch. These stacks are based on 940nm laser bars AuSn soldered on CuW-submounts. By joining the 56 bar-on-submounts (BoS) using an electrically conductive material the complete continuous stack is formed. A robot is used to load these BoS into fixtures for the bonding process. We show the attachment of this monolithic stack to an insulated micro-channel cooler using electrically insulating bonding material to complete the laser module. Use of the novel bonding materials at lower joining temperatures, compared to conventional soldering processes, results in a stack assembly with lower induced stress which allows monolithic stacks with higher number of elements. We demonstrate peak power above 500W per bar at 0.3% duty cycle and 500A peak current with an average junction temperature of 45°C, with over 29kW total peak power. Analysis of the dynamic temperature behavior within the pulses is presented using fast spectral measurements and simulation along with initial reliability test results.

Conference Presentation

(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.

Citation Download Citation

Tobias Barnowski, Thilo Vethake, Katie Atwater, Tim Gong, Reza Razavi, Eric Zanghi, Ping Zhang, and Stewart McDougall "Advances in manufacturing technology for low cost QCW diode laser stacks suitable for high energy pumping applications", Proc. SPIE 12867, High-Power Diode Laser Technology XXII, 1286713 (12 March 2024); https://doi.org/10.1117/12.3003308

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE