Structural Health Monitoring (SHM) of pipelines using nondestructive testing/evaluation (NDT/E) techniques is important particularly for the energy industries and for the oil/gas distribution which helps reduction in maintenance costs as well as increased service lifespan. Among various NDE techniques, ultrasonic guidedwaves (GWs) technique is popular for inspection and monitoring of pipes due to its advantages e.g., long-distance monitoring using a fixed sensor probe, full volumetric coverage, and inspection for invisible or inaccessible structure. Recently, performance and scope of the GWs method is explored using optical fiber sensing technology such as fiber Bragg gratings are demonstrated for many ultrasonic sensing applications. The optical fiber sensors bring the advantage of remote sensing, large acoustic bandwidth, and multiplexing capability of the sensors to extend the range of GWs based NDE method. This work describes the health monitoring of damaged pipeline structure in a nondestructive manner using alternative No-core fiber (NCF) based quasi-distributed fiber-optic acoustic sensor combined with ultrasonic GWs excitation. We set up two similar 6-inch carbon-steel pipes (16-ft long), one consists of various defects and the other is healthy without any defect for reference. The pipes are actively excited by employing different ultrasonic sources; (1) magnetostrictive collar (MR) to generate the axisymmetric (torsion) GWs and (2) conventional piezoelectric patches to generate the antisymmetric flexural waves on the exterior surface, and the characteristics of acoustic-ultrasonic signals are studied using NCF based multiplexed fiber-optic sensor. Fiber optic sensor is an inline multimode interferometer made by sandwiching a piece of NCF (~5cm) between the single mode fibers. The NCF sensor is remotely bonded at 45° w.r.t pipe axis on one end and has an ultrasonic sensing range of >600kHz. Finally, the measured acousto-ultrasonic signals for different ultrasonic sources are compared to those obtained by the numerical simulation or electrical-based sensor for the healthy and damaged test pipes. The proposed work presents useful insight for damage detection in pipes using an NCF-based quasi-distributed fiber-optic acoustic sensor combined with ultrasonic GWs excitation.
|