|
Due to advances in observation and imaging technologies, modern astronomical satellites generate large volumes of data. This necessitates efficient onboard data processing and high-speed data downlink. Reflecting this trend is the Visible Extragalactic background RadiaTion Exploration by CubeSat (VERTECS) 6U Astronomical Nanosatellite. Designed for the observation of Extragalactic Background Light (EBL), this mission is expected to generate a substantial amount of image data, particularly within the confines of CubeSat capabilities. This paper introduces the VERTECS Camera Control Board (CCB), an open-source payload interface board leveraging Commercial Off-The-Shelf (COTS) components, with a Raspberry Pi Compute Module four at its core. The VERTECS CCB hardware and software have been designed from the ground up to serve as the sole interface between the VERTECS bus system and astronomical imaging payload, while providing compute capability not usually seen in nanosatellites of this class. Responsible for mission data processing, it will facilitate high-speed data transfer from the imaging payload via gigabit Ethernet, while also providing a high-bitrate serial connection to the payload x-band transmitter for mission data downlink. Additional interfaces for secondary payloads are provided via USB-C and standard 15-pin camera connectors. The Raspberry Pi embedded within the VERTECS CCB operates on a standard Linux distribution, streamlining the software development process. Beyond addressing the current mission’s payload control and data handling requirements, the CCB sets the stage for future missions with heightened data demands. Furthermore, it supports the adoption of machine learning and other compute-intensive applications in orbit. This paper delves into the development of the VERTECS CCB, offering insights into the design and validation of this next-generation payload interface, to ensure that it can survive the rigors of space flight.
|
