Paper
16 August 2024 Effect of resonator type on beam quality of solid-state laser
Xu Pei, Yichen Yuan
Author Affiliations +
Proceedings Volume 13231, 4th International Conference on Laser, Optics, and Optoelectronic Technology (LOPET 2024); 132310R (2024) https://doi.org/10.1117/12.3040141
Event: 4th International Conference on Laser, Optics, and Optoelectronic Technology (LOPET 2024), 2024, Chongqing, China
Abstract
In order to investigate the impact of the resonator type on the beam quality of a solid-state laser, a diode pump module was built using Nd:YAG as the gain medium. A basic resonator, measuring 185mm in length, was then assembled with two different types of mirrors. There are five types of mirror fitting modes: flat mirror with flat mirror, flat mirror with concave mirror with a curvature radius of 4000mm, flat mirror with concave mirror with a curvature radius of 3800mm, concave mirror with a curvature radius of 2800mm with convex mirror with a curvature radius of 3000mm, and concave mirror with a curvature radius of 2600mm with convex mirror with a curvature radius of 3000mm. To determine the correlation between the peak power of the laser output and the beam quality of various resonators, the peak power and spot size were measured, and the M2 factor was calculated and analyzed.
(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Xu Pei and Yichen Yuan "Effect of resonator type on beam quality of solid-state laser", Proc. SPIE 13231, 4th International Conference on Laser, Optics, and Optoelectronic Technology (LOPET 2024), 132310R (16 August 2024); https://doi.org/10.1117/12.3040141
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Laser resonators

Cavity resonators

Optical resonators

Solid state lasers

Nd:YAG lasers

Laser frequency

Back to Top