Paper
1 February 1991 Top-side electroluminescence: a failure analysis technique to view electroluminescence along a laser channel
Victor O. Blow, Kenneth J. Giewont
Author Affiliations +
Proceedings Volume 1366, Fiber Optics Reliability: Benign and Adverse Environments IV; (1991) https://doi.org/10.1117/12.24688
Event: SPIE Microelectronic Interconnect and Integrated Processing Symposium, 1990, San Jose, United States
Abstract
Electroluminescence imaging along the optical channel of a laser diode can show non-radiative defects or non-uniform emission in the channel which may be contributing to failure. This imaging technique is easily done on specially prepared test sites or on lasers that have not been diced and packaged. Once the laser diode is packaged (typically in a TO type package) it is difficult to utilize this technique due to the difficulty in successfully exposing the optical channel for inspection. This paper describes a practical technique to perform optical channel electroluminescence imaging of packaged laser diodes. It has been successfully applied to 780nm, 800nm, and 1300nm laser diodes. The information obtained can be used to improve reliability and/or life of the product analyzed. This paper will highlight details of the technique along with illustrations of typical results. Applications to failure analysis will also be discussed.
© (1991) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Victor O. Blow and Kenneth J. Giewont "Top-side electroluminescence: a failure analysis technique to view electroluminescence along a laser channel", Proc. SPIE 1366, Fiber Optics Reliability: Benign and Adverse Environments IV, (1 February 1991); https://doi.org/10.1117/12.24688
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Electroluminescence

Failure analysis

Semiconductor lasers

Polishing

Microscopes

Channel projecting optics

Reliability

RELATED CONTENT

Considerations For Accelerated Laser Diode Life Testing
Proceedings of SPIE (February 23 1987)
Reliability of high-power AlGaAs/GaAs QW laser diodes
Proceedings of SPIE (September 24 1996)
Denmark - Poland Optical Submarine Cable System
Proceedings of SPIE (January 30 1990)
High Reliability Packaging For Fibre Optic Sources
Proceedings of SPIE (February 23 1987)

Back to Top