Paper
28 October 1994 Adaptive beamformer delay compensation for active sonar
James M. Alsup
Author Affiliations +
Abstract
Delay compensation as a preliminary step to adaptive beamforming (ABF) is described. Such compensation can be used for linear or planar arrays whenever the temporal width of a signal's matched-filter output peak is significantly shorter than the propagation time across the array. Preliminary delay compensation is not normally used in passive ABF processing since the signals being processed are usually steady-state or can be regarded as such. However, when transient events much be processed, such as those associated with either impulsive echoes or with matched-filter outputs of large TW signals, then compensation prior to ABF may be required in order to obtain the full array gain for the signal of interest. Methods for achieving wide-band delay compensation are described, the parameters associated with defining the minimal compensation required are explained, and losses suffered when compensation is not used are discussed.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
James M. Alsup "Adaptive beamformer delay compensation for active sonar", Proc. SPIE 2296, Advanced Signal Processing: Algorithms, Architectures, and Implementations V, (28 October 1994); https://doi.org/10.1117/12.190892
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Signal processing

Doppler effect

Active sonar

Sensors

Matrices

Chlorine

Phased arrays

Back to Top