Design, analysis, and testing of collimators used for testing low-resolution thermal imagers

Stanley J. Pruchnic Jr.; Christopher Carl Alexay; Robert A. Spande; Leslie R. Condiff; Paul A. Bell

doi:10.1117/12.241969

10 June 1996 Design, analysis, and testing of collimators used for testing low-resolution thermal imagers

Stanley J. Pruchnic Jr., Christopher Carl Alexay, Robert A. Spande, Leslie R. Condiff, Paul A. Bell

Proceedings Volume 2743, Infrared Imaging Systems: Design, Analysis, Modeling, and Testing VII; (1996) https://doi.org/10.1117/12.241969
Event: Aerospace/Defense Sensing and Controls, 1996, Orlando, FL, United States

Abstract

Engineering perspectives related to specification, design, manufacture and evaluation of collimator lenses are discussed using the example of a recently manufactured collimator for use in thermal imager evaluations. Collimator optics are important test facility components used for the evaluation of thermal imager systems. The thermal imager test facility at NVESD needed new collimator lenses in order to use targets small enough to work within the limitations of blackbody uniformity while testing thermal imager systems for the Driver's Viewer Enhancer program. These systems require very low spatial frequency targets to completely characterize minimum resolvable temperature difference. Three perspectives on the design, manufacture and testing of a collimator lens assembly are presented in this paper: (1) the perspective of the user, who is the optics specifier; (2) that of the optics designer/manufacturer; and (3) that of the optical testing engineers who validated the optics design using CODE V and tested the optics at NVESD's optical test facility. Different perspective result in the customary use of different parameters to define specifications. Therefore, optics specifiers must consider various perspectives to ensure the lens design meets desired requirements.

Citation Download Citation

Stanley J. Pruchnic Jr., Christopher Carl Alexay, Robert A. Spande, Leslie R. Condiff, and Paul A. Bell "Design, analysis, and testing of collimators used for testing low-resolution thermal imagers", Proc. SPIE 2743, Infrared Imaging Systems: Design, Analysis, Modeling, and Testing VII, (10 June 1996); https://doi.org/10.1117/12.241969

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available