Paper
27 June 1996 Conductive polymer films for microbolometer applications
James Kaufmann, Mary G. Moss, Yongqiang Wang, Ryan E. Giedd
Author Affiliations +
Abstract
In order to maximize the responsivity of a thermal detector, the detector is often fabricated on a thin membrane which is suspended over a substrate. Maximizing responsivity requires minimizing the thermal conductance and heat capacity while keeping the thermal time constant below the bandwidth of the system; maximizing the temperature coefficient of resistance (TCR) of the sensor materials, and reducing system noise. Uniformity of the detector elements greatly impacts the performance of a focal plane array. We report here a new material for IR bolometer applications. The material is a polymer film which has been made conductive by ion implantation. Implanted films which have a thickness of 1500 angstrom may be patterned by conventional photoresist processes to form small geometry elements with dimensions of 10 to 50 micrometers. Suspended conducting polymer bridges are then formed from the implanted films by etching of a sacrificial layer of silicon dioxide. High quality films with resistivities from 400 ohms/square to 10 megaohms/square can be produced by the ion implantation technique. Temperature coefficient of resistance (TCR) as a function of implantation energy and film resistivity are presented.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
James Kaufmann, Mary G. Moss, Yongqiang Wang, and Ryan E. Giedd "Conductive polymer films for microbolometer applications", Proc. SPIE 2744, Infrared Technology and Applications XXII, (27 June 1996); https://doi.org/10.1117/12.243520
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Resistance

Ions

Polymers

Polymer thin films

Etching

Photoresist materials

Sensors

Back to Top