Paper
14 November 1996 Risk-based inspection of pressurizer surge lines
Nitin J. Shah, Keshab K. Dwivedy
Author Affiliations +
Abstract
The Reactor Coolant System (RCS) piping of a pressurized water reactor (PWR) plant is probably the best in terms of resistance to known degradation mechanisms of passive components. However, a failure in the RCS piping is extremely important in terms of safety and economic significance. Therefore, an effective management tool is needed to mitigate the potential effects of degradation due to aging or other effects such that plant reliability and availability are not affected. Currently, the RCS piping of all US PWR plants is being subjected to inservice inspection (ISI) based upon certain deterministics criteria set by the ASME code and the NRC regulatory guide. Even though the history of large RCS piping has not shown any degradation, the ISI continues at many locations at greta expense to the plant owners whereas, there can be only a few locations of relatively high vulnerability. A risk based ISI can provide an alternative and cost-effective solution in this situation. Pressurizer surge line is a unique segment in the RCS which is subjected to significant transient loadings due to stratification and striping during the normal heatup and cooldown processes. Therefore, the surge line is considered for illustration. Examples of structural reliability studies of pressurizer surge lines in four PWR units are presented in this paper to demonstrate possible reduction of ISI and significant cost saving without reduction of plant safety or reliability.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Nitin J. Shah and Keshab K. Dwivedy "Risk-based inspection of pressurizer surge lines", Proc. SPIE 2947, Nondestructive Evaluation of Utilities and Pipelines, (14 November 1996); https://doi.org/10.1117/12.259181
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Failure analysis

Inspection

Reliability

Safety

Software

Structural analysis

Data analysis

Back to Top