Paper
8 May 1997 Geometrical optical modeling considerations for LCD projector display systems
Author Affiliations +
Proceedings Volume 3013, Projection Displays III; (1997) https://doi.org/10.1117/12.273865
Event: Electronic Imaging '97, 1997, San Jose, CA, United States
Abstract
End-to-end modeling of the photometric performance of LCD projection system using Monte Carlo geometrical ray tracing methods is an accurate and precise tool for predicting and improving the performance of these deices before, during and after product development. However, an accurate simulation first requires considering which physical properties contribute most to the system's photometric performance. Second, these properties must be characterized by physical measurements and translated into the tangible modeling parameters of a ray tracing program. Third, the implications of using a Monte Carlo ray tracing algorithm, and in general any other optical transformation algorithm, on radiometric accuracy must be well understood. These considerations as well as a generalized approach to the characterization and simulation of an LCD projector are described. A commercially available ray tracing program, the Advanced Systems Analysis Program, is used to demonstrate this approach. The irradiance uniformity, CIE color performance and screen brightness of an arc source LCD projector system are computed as an example.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
John Charles Schweyen, Kevin J. Garcia, and Philip L. Gleckman "Geometrical optical modeling considerations for LCD projector display systems", Proc. SPIE 3013, Projection Displays III, (8 May 1997); https://doi.org/10.1117/12.273865
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Monte Carlo methods

Projection systems

Ray tracing

LCDs

Systems modeling

Coating

Lamps

RELATED CONTENT

Ray tracing software application in VIP lamp design
Proceedings of SPIE (August 16 2002)
Illumination systems design: techniques in transition
Proceedings of SPIE (September 21 1998)
Ray tracing from finite element results
Proceedings of SPIE (September 16 1993)
Modeling transflective LCD illumination systems
Proceedings of SPIE (September 09 2010)
Optical design using luminance in ray data sets
Proceedings of SPIE (October 11 2012)

Back to Top