Paper
29 June 1998 Bottom-ARC optimization methodology for 0.25-μm lithography and beyond
Maaike Op de Beeck, Geert Vandenberghe, Patrick Jaenen, Feng-Hong Zhang, Christie Delvaux, Paul Richardson, Ilse van Puyenbroeck, Kurt G. Ronse, James E. Lamb III, Johan B. C. van der Hilst, Johannes van Wingerden
Author Affiliations +
Abstract
This paper reports on an optimization methodology for BARC/resist processes in order to obtain best CD-control on various substrate topographies. A selection of resist and BARC materials is studied by means of simulations and experiments. Two BARC properties, turned out to be of major importance: planarization effects on topography and etch behavior. The topography itself is very important too: step height and lateral dimensions have a severe influence on CD control. Based on a new evaluation technique, the use of topographical swing curves, the optimum thickness of the BARC layer and of the resist layer are determined.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Maaike Op de Beeck, Geert Vandenberghe, Patrick Jaenen, Feng-Hong Zhang, Christie Delvaux, Paul Richardson, Ilse van Puyenbroeck, Kurt G. Ronse, James E. Lamb III, Johan B. C. van der Hilst, and Johannes van Wingerden "Bottom-ARC optimization methodology for 0.25-μm lithography and beyond", Proc. SPIE 3334, Optical Microlithography XI, (29 June 1998); https://doi.org/10.1117/12.310762
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Critical dimension metrology

Etching

Reflectivity

Semiconducting wafers

Chlorine

Ions

Lithography

RELATED CONTENT


Back to Top