Paper
7 September 1999 Plasma pretreatment and coating of PMMA Fresnel lenses
Ulrike Schulz, Heidrun Jaenchen, Norbert Kaiser
Author Affiliations +
Abstract
Most Fresnel lenses for projection systems are made from Polymethylmethacrylate (PMMA). Such lenses, e.g. for LCD- projectors, are flat discs whereas one surface is plane and the other microstructured. Special coatings are necessary to reduce stray light and 'hot spots' in the projected image, finally. Plasma-ion Assisted Deposition has been applied to realize dielectric multilayers on PMMA. Additionally, a low pressure plasma pre-treatment has been carried out as the first step of the coating process which inducing an irreversible modification of surface composition that leads to excellent adhesion conditions for coating. The special problem for coating the microstructured surface is the inclination angle of the small Fresnel facets which increases from the center to the outer area of microstructured lens. Consequently, the vapor incidence angle changes in the same way. Another problem is to keep the temperature at the polymer surface low during coating process. Thin microstructured polymer lenses show lower dimensional stability compared to flat or compact samples. Several coating designs have been invested to get a uniform moderate antireflective effect and in result an optimized light impression for the observer.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ulrike Schulz, Heidrun Jaenchen, and Norbert Kaiser "Plasma pretreatment and coating of PMMA Fresnel lenses", Proc. SPIE 3738, Advances in Optical Interference Coatings, (7 September 1999); https://doi.org/10.1117/12.360122
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Coating

Polymethylmethacrylate

Fresnel lenses

Antireflective coatings

Polymers

Reflection

Plasma

RELATED CONTENT

Reduction of reflection losses at PMMA Fresnel lenses
Proceedings of SPIE (September 07 1999)
Procedures to reduce reflection on polymer surfaces
Proceedings of SPIE (August 23 2005)
Abrasion-resistant antireflection coating for plastics
Proceedings of SPIE (October 19 2000)
New plasma processes for antireflective structures on plastics
Proceedings of SPIE (September 25 2008)
Developing polymeric antireflective coatings
Proceedings of SPIE (September 09 2008)

Back to Top